Blackpool · England
Bath & shower resealing (mastic) in Marton, Blackpool
Bath, shower and sink resealing with new mould-resistant silicone at your home in Marton, with a one-year guarantee on every repair.
- Gaps by the taps
- Sealant that is split or lifting
- Damp near the bath
Honest limits
In fairness, some problems need a different fix:
- Water damage behind the bath that needs a builder
- Gaps so wide they need filling or trims before sealing
- A bath or tray that moves, until its support is fixed
Send us pictures and we will tell you honestly before you book.
Materials we work on in Marton
- Baths
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
- Basins & vanity units
Bath resealing in Marton, done in place
Baths are resealed with water in them, so the joint opens fully, which stops the new seal tearing the first time the bath is used. If you are dealing with black spots in the silicone and stained silicone, we can help.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Marton (FY4, FY3, FY1)
- County
- Blackpool
- Warranty
- A year, on every repair
- Quotes
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What bath resealing costs
Each job gets its own fixed quote. These are the things that affect it:
- The size and number of damaged areas
- Unusual colours or finishes
- Doing more than one item at once
- Access to the area
A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
Quotes from your photos
Phone photos are fine, there’s no need for anything special. Just ensure we can see:
- The material, if you know it
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
For a price in Marton, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Repairs by material
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Landlords, agents and businesses in Marton
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
How to care for the repair
So the finish stays in good condition for years:
- Clean the sealant gently and regularly
- Ventilate the bathroom well
- Replace the seal when mould sets in
- Air the room after use
Use the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
Damp below or loose tiles need checking quickly. It may be more than a reseal, and we will say if you need a builder or plumber.
Marton questions
Can you price it without visiting?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Is a repair better than a new one?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you seal over the old sealant?
Never over old. The old sealant is cut out and the joint cleaned and dried.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Why does my sealant keep going mouldy?
Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.
Marton and nearby
Marton is about 1 mile south-east of Blackpool, in Blackpool. Clients in Marton get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Marton is one of 12 towns and villages in Blackpool where we work. We work right across the region, from Marton to Liverpool (27 miles away).
Postcode districts we cover here: FY4, FY3 and FY1. From Acton Road, Bean Avenue and Howe Avenue or a nearby road, we can come to you. Nearby, we also work in Squires Gate (1 mile south-west), South Shore (2 miles west), Starr Gate (2 miles south-west), Lytham St Anne's (3 miles south) and St Annes (3 miles south). Further out, we also cover Layton (3 miles north), Warbreck (3 miles north) and North Shore (3 miles north-west).
Near you in Marton
We visit homes around Marton Primary Academy and Nursery, St. George's Church of England High School and Elmslie School. Nearby too are St Christopher & St Nicholas (0.6 miles south-west) and Stanley Park (1.3 miles north). Marton’s nearest station is Blackpool South station, about 1.2 miles west. Well-known places in the area include Brooks Collectables And Museum (1.5 miles west) and Blackpool Victoria Hospital (1.7 miles north). Not far away are Marton Mere.
Common problems we fix in Marton
Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.
Look out for these signs:
- Black spots in the silicone
- Water getting behind the bath or tray
- Silicone coming away from the tiles
- A messy previous reseal
What your quote should include
- Whether the price covers travel
- How the room is protected while they work
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Other services in Marton
What happens on the day
You don’t need to empty the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take about two hours for a bath, and you can get on with other things while we are there.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
Preparing for the visit
- Keep a parking space free if you can
- Have a window or extractor fan available
- Tell us about parking, stairs or access
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
