Hampshire · England
Bath Resealing in Trotton Marsh
Fixed-price bath resealing in Trotton Marsh and the surrounding area, normally in one visit and guaranteed for a year.
- Sealant that’s split or lifting
- Damp near the bath
- Gaps by the taps
Bath resealing in Trotton Marsh without replacing anything
Baths are resealed with water in them, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. Our repair technicians work on wet rooms, basins & vanity units and baths, and common reasons people get in touch are discoloured, yellow sealant and an untidy old seal.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Trotton Marsh (GU30, GU31)
- County
- Hampshire
- Guarantee
- A year, on every repair
- Price
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Resealing in Trotton Marsh: why it matters
Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
Why book with us
- Fixed prices from your photos
- One-year guarantee on every repair
- One visit for most repairs
- We come to you, anywhere in the UK
See our pricing.
What else we do in Trotton Marsh
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
FAQs for Trotton Marsh
What areas do you cover?
Everywhere in the UK, Trotton Marsh included. There’s no extra charge for travel.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Can new silicone go over old?
Never over old. The old sealant is cut out and the joint cleaned and dried.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.
Why does my sealant keep going mouldy?
Mould needs moisture. Ventilation and drying keep it clean longer.
Why does the silicone keep cracking?
Something is moving. Persistent splitting can mean the support needs attention.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
The process
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to a couple of hours, including clearing up.
- First we strip out every bit of the old mastic.
- We clean the joint and treat any mould.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Before we arrive
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Trotton Marsh and nearby
Trotton Marsh is about 5 miles east of Petersfield, in Hampshire. Clients in Trotton Marsh get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. We cover all 683 towns and villages in Hampshire. Our jobs stretch from Trotton Marsh to London (45 miles away).
Postcode districts we cover here: GU30 and GU31. Nearby, we also work in Borden (1 mile west), Milland (1 mile north), Chithurst (1 mile south-east), Rogate (2 miles south-west) and Rake (3 miles north-west). Within a short drive, we also cover Havant (13 miles south-west), Horndean (12 miles south-west), Alton (11 miles north-west), Waterlooville (13 miles south-west), Petersfield (5 miles west) and Purbrook (14 miles south-west).
Near you in Trotton Marsh
For rail, the closest station is Liphook station, about 3.7 miles north. Well-known places in the area include Midhurst Museum (4 miles south-east) and Midhurst Community Hospital (3.8 miles south-east). Green spaces nearby include Iping and Stedham Commons and Wheeler's Down.
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Prices and what affects them
Each job gets its own fixed price. These are the things that affect it:
- The colour and finish to match
- How many areas need work
- The type of damage
- Whether old repairs or coatings need taking off
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your pictures
When you take your pictures, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- Details of any past repairs
- A picture taken from further back
- The postcode, so we can plan the visit
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and you are under no obligation.
Repairs by material
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
We fill the bath before sealing, to open the joint fully.
When a repair isn’t the answer
It helps to know what we can’t do too:
- Loose tiles, which need refixing first
- A flexing bath
- Very wide gaps that need a trim
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Baths
- Kitchen worktops & sinks
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Open a window after bathing
- Reseal when black spots won’t clean off
- Don’t stand toiletries on the seal
- Keep the joints dry
Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we will say if you need a builder or plumber.
About our accreditations · Every repair comes with a one-year guarantee.
