Wiltshire · England

Bath Resealing in Minety

Fixed-price bath resealing in Minety and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Silicone smeared on tiles
  • Old sealant that looks dirty
  • Silicone coming away from the tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Minety

What we do, step by step

Arrival times are agreed in advance. Once we are there, the work takes a couple of hours. The room is left tidy and ready to use once it has cured.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Let us know which floor the room is on
  • Mention any parking restrictions or tricky access

How to get a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, include your postcode and send them to us. What comes back is a fixed price, not a guess.

Send pictures for a quote

Read more

How we handle bath resealing in Minety

Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. If you’re dealing with water getting behind the bath or tray and black spots in the silicone, we can generally put it right, on basins & vanity units, kitchen worktops & sinks and wet rooms alike.

You get a one-year guarantee, the same in Minety as everywhere else we work.

Area
Minety (SN16)
County
Wiltshire
Guarantee
One year on every repair
Quote
Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

Landlord and trade work in Minety

For anyone letting property in or around Minety, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

Minety: your questions answered

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

Why does my sealant keep splitting?

The bath or tray is probably flexing. If it keeps happening, the support may need fixing.

What happens after I send photos?

We review the photos and send a fixed quote and the next dates we have.

Will there be a smell?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

Do you charge for travel?

There’s no separate call-out charge. The fixed price covers the visit and the work.

Do you come to Minety?

Yes. We cover the entire UK and come to Minety. Send pictures and we will quote, or call 0345 017 0787.

What does bath resealing cost?

Because every job differs, we price from photos. You’ll get a fixed figure before booking.

How quickly can you book me in?

We will give you dates with your quote. Tell us if you need it done quickly.

Covering Minety

Minety is about 7 miles south of Cirencester, in Wiltshire. We visit homes and businesses in Minety and nearby villages, so nothing has to leave your home. Our technicians cover all 425 towns and villages in Wiltshire. You can also see our page for Birmingham, about 59 miles away.

All of SN16 is covered. From Station Road, Silver Street and Oakleaze or anywhere nearby, we can come to you. We also cover the places around Minety: Lower Moor (1 mile north-west), Minety Common (1 mile south-east), Brandier (1 mile north-west), Upper Minety (1 mile west) and Leigh (2 miles north-east). Further out, we also cover Chippenham (13 miles south-west), Calne (12 miles south), Malmesbury (6 miles west), Hardenhuish (13 miles south-west), Lyneham (7 miles south) and Pewsham (13 miles south-west).

What’s near Minety

Our customers here include homes close to Church of St Leonard and Minety Church of England Primary School and the streets around them. Well-known places in the area include Ashton Keynes Castle (2.7 miles north-east). Green spaces nearby include Clattinger Farm.

Map of Minety © OpenStreetMap contributors

Common problems we fix in Minety

Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint moves slightly every time the bath is filled.

If you can see any of these, send us a picture:

  • Damp near the bath
  • Silicone smeared on tiles
  • Black mould in the sealant
  • Stained silicone

What to look for in a quote

  • How the room is protected while they work
  • Whether the price is fixed and includes VAT
  • Who will actually do the work
  • How long the guarantee is and what it covers

10 questions to ask before booking

Keeping it looking good

Much of the damage we repair could have been avoided. A few tips:

  • Use the extractor fan
  • Wipe the joints dry after use
  • Give the seal a regular clean
  • Store bottles on a shelf

Avoid scraping the joints, and keep shampoo bottles off the joints.

Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. An early reseal keeps water where it belongs.

Repairs by material

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Baths

Baths are resealed with water in them, to open the joint fully.

Resealing in Minety: why it matters

A reseal is one of the cheapest bathroom jobs there is, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why Minety clients choose us

  • One visit for most repairs
  • CHAS and Constructionline accredited
  • We will tell you if it’s not worth repairing
  • A fixed quote before booking

See our pricing.

Prices and what affects them

You won’t pay by the hour. The price is based on:

  • Access to the area
  • Any earlier repairs that need removing first
  • How much damage there is
  • What the surface is made of

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

Send photos for a quote

It only takes a minute to photograph the damage. Please include:

  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings
  • A coin beside the damage so we can judge size
  • One sharp close-up of the damage

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.