Norfolk · England

Bath Resealing for Necton homes

Bath resealing across Necton and nearby, done in a single visit in most cases.

  • Missing sealant behind the taps
  • Gaps in the seal
  • Mould you can’t clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Necton homes

Bath resealing in Necton without replacing anything

We reseal baths, shower trays, basins and worktops using mould-resistant silicone. A typical reseal takes a couple of hours, then it needs to cure. Typical jobs include black mould in the sealant and damp near the bath, in basins & vanity units, wet rooms and shower trays & enclosures.

We stand behind the work with a one-year guarantee, so you’re covered after the visit.

Location
Necton (PE37)
Area hub
Norfolk
Guarantee
One year on every repair
Quote
Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What your bath or shower is made of matters

Baths

Baths are resealed with water in them, to open the joint fully.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

The process

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a couple of hours, and we finish by cleaning up and talking you through the result.

  1. The surrounding area is protected and the joints masked.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. We run a continuous bead of new silicone.
  5. The bead is smoothed, the tape removed and the seal left to cure.

How to prepare

  • Tell us about parking, stairs or access
  • Tell us if there are stairs or a lift
  • Move bottles, mats and clutter away from the area

Ask for a price

For a price in Necton, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Advice

What affects the price in Necton

Every quote is fixed and free. What we look at:

  • Whether old repairs or coatings need taking off
  • How much damage there is
  • The material
  • Access to the area

A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with no extras added later.

Send pictures for a quote

You can normally get a fixed quote without us visiting. To help us price it:

  • Any details about the material
  • A close-up of the damage, in focus
  • A coin beside the damage so we can judge size
  • Natural light rather than flash

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed price.

FAQs for Necton

Are there extra charges for Necton?

Travel is included in the price, and we charge the same wherever you are.

What areas do you cover?

The entire UK, including all of Norfolk. Send your postcode with your pictures and we will confirm dates.

Can new silicone go over old?

We always remove the old sealant completely. New silicone won’t bond to old.

Why does mould come back so fast?

Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.

Can pets and children be at home?

Just keep them out of the work area. We’ll tell you when the room can be used again.

How long does a reseal take?

Generally a couple of hours, then it needs to cure.

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Water damage behind the bath that needs a builder
  • Hollow or loose tiles
  • Very wide gaps that need a trim

Not sure? Send photos and we will give you a straight answer.

What we work on

  • Basins & vanity units
  • Shower trays & enclosures
  • Wet rooms
  • Kitchen worktops & sinks
  • Baths

For landlords and businesses

For anyone letting property in or around Necton, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Covering Necton

Necton is about 7 miles west of Dereham, in Norfolk. From the centre of Necton to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Necton is one of 797 places in Norfolk we cover.

We cover every part of PE37. From Chantry Court, Hale Road and Mill Street or anywhere nearby, we can come to you. We also travel to Holme Hale (1 mile south-east), North Pickenham (2 miles south-west), Little Dunham (2 miles north), Sporle (2 miles north-west) and Ashill (3 miles south). Further out, we also cover Dereham (7 miles east), Wymondham (15 miles east), Attleborough (13 miles south-east), Watton (6 miles south-east), Swaffham (4 miles west) and Fakenham (13 miles north).

Local landmarks in Necton

Typical jobs here are in homes near Necton VA Primary School and Church of All Saints and the streets around them. Further afield, we also cover the area around Bellarmine Museum (3.7 miles west). Open spaces near Necton include Saham Mere.

Map of Necton © OpenStreetMap contributors

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Aftercare tips

A little care keeps the finish looking good. Our advice:

  • Clean the joints with a mild cleaner
  • Reseal when black spots won’t clean off
  • Run the extractor fan during and after showers
  • Open a window after bathing

Good ventilation is the best protection, and dry the joints after bathing to keep mould away.

Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. An early reseal keeps water where it belongs.

Common problems we fix in Necton

Even good sealant eventually discolours. Steam, soap and movement all wear it down.

Contact us if you’ve noticed:

  • An untidy old seal
  • Missing sealant behind the taps
  • Water getting behind the bath or tray
  • Stained silicone

Questions to ask before you book

  • How your room will be protected
  • Whether there are any call-out or travel charges
  • Whether the price is fixed and includes VAT
  • What aftercare is recommended

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.