Wiltshire · England
Bath Resealing for Redstocks homes
Bath, shower and sink resealing with new mould-resistant silicone in Redstocks, carried out at your home and guaranteed for a year.
- Gaps by the taps
- A messy previous reseal
- Water getting behind the bath or tray
About our bath resealing in Redstocks
All of the old sealant is cut out, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. Common call-outs are for an untidy old seal and leaks at the edges, across kitchen worktops & sinks, shower trays & enclosures and basins & vanity units.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Redstocks (SN12)
- Area hub
- Wiltshire
- Guarantee
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath resealing
There is no charge for travel to Redstocks. The price comes down to:
- Unusual colours or finishes
- Where the damage is and how we get to it
- What kind of damage it is
- Whether we combine several jobs
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
Phone photos are fine. Just make sure we can see:
- A picture taken from further back
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Covering Redstocks
Redstocks is about 2 miles south-east of Melksham, in Wiltshire. Anywhere in SN12, we come to you. We cover 425 places in Wiltshire. Our jobs stretch from Redstocks to Birmingham (77 miles away).
Jobs in SN12 are booked in the same way as anywhere else. We regularly work on streets such as Bath Road and Carnation Lane and the roads around them. Nearby, we also work in Bowerhill (1 mile west), The Stocks (1 mile south), Sandridge (1 mile north), Melksham (2 miles north-west) and Berryfield (2 miles west). Further out, we also cover Trowbridge (5 miles south-west), Chippenham (7 miles north), Calne (7 miles north-east), Devizes (5 miles east), Westbury (8 miles south-west) and Warminster (12 miles south).
Local landmarks in Redstocks
Our customers here include homes close to Melksham Oak Community School, Church of the Holy Cross and The Barge Inn and the streets around them. The closest station to Redstocks is Melksham station, about 2.4 miles north-west of the centre. Nearby you will also find Avon Tyre Museum (2.4 miles north-west) and Melksham Community Hospital (1.4 miles west).
Landlord and trade work in Redstocks
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Redstocks as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Why reseal now?
Resealing costs very little and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. We charge the same wherever you are, with no extra for Redstocks. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Redstocks customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- No need to remove anything
- No extra charge for your area
- Repair technicians who travel to you, UK-wide
Read our full price list.
FAQs for Redstocks
What does bath resealing cost?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
What information do you need?
Photos of the damage, a photo of the entire bath or shower and your postcode. After that, we just agree a date.
How long does silicone take to cure?
Normally about a day later. We’ll tell you the exact time.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How do I stop mould in sealant?
Usually poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
How long does resealing take?
Usually a couple of hours, then it needs to cure.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you work in Redstocks?
Yes, we do. We send a technician to Redstocks for every job, with no extra charge for travel.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Hollow or loose tiles
- Hidden water damage
- Movement in the bath or tray
Send us photos and we will tell you honestly before you book.
Materials we repair
- Kitchen worktops & sinks
- Shower trays & enclosures
- Baths
- Basins & vanity units
- Wet rooms
How the visit works
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for around two hours. Before leaving, we tell you when it can be used and how to look after it.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- We clean, treat and dry the joint.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
How to get a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
Also near Redstocks
Also in Redstocks
Aftercare tips
Once the work has cured, treat it gently:
- Keep the joints dry
- Keep bottles off the joints
- Use the extractor fan
- Clean the joints with a mild cleaner
Leave the sealant to cure for the time we give you, typically around 24 hours.
Mouldy sealant is more than a cosmetic problem. An early reseal keeps water where it belongs.
When to call us in Redstocks
Even good sealant eventually discolours. Steam, soap and movement all take their toll.
Send us a picture if you notice any of these:
- Unsealed corners
- An untidy old seal
- Damp near the bath
- Black mould in the sealant
What to look for in a quote
- Whether the colour is mixed to match
- How to look after the finish
- Whether the price covers travel
- What happens if they find more damage
About our accreditations · Every repair comes with a one-year guarantee.
