Perth and Kinross · Scotland

Bath Resealing for Stormontfield homes

Bath resealing in Stormontfield without the cost of replacing. Get a fixed quote from your photos, then we come to you.

  • Silicone smeared on tiles
  • Old sealant that looks dirty
  • Mould you can’t clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Stormontfield

What we’re called out for in Stormontfield

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint flexes each time the bath fills.

You may need us if you’ve spotted:

  • Black mould in the sealant
  • A messy previous reseal
  • Leaks at the edges
  • Missing sealant behind the taps

Questions to ask before booking

  • When it can be used again
  • Whether there are any call-out or travel charges
  • What aftercare is recommended
  • Whether cleaning and preparation are in the price

Choosing a repair company

Bath resealing in Stormontfield, done in place

Baths, trays, basins and kitchen worktops all get resealed, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours, then it needs to cure. Our technicians work on kitchen worktops & sinks, shower trays & enclosures and basins & vanity units, and common reasons people contact us are unsealed corners and damp near the bath.

We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.

Roll-top bath being refinished by a Surface Doctor technician
Location
Stormontfield (PH2)
County
Perth and Kinross
Cover
One year on every repair
Price
Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026

Prices and what affects them

You won’t pay by the hour. The price is based on:

  • How easy the damage is to reach
  • The size and number of damaged areas
  • Unusual colours or finishes
  • What the surface is made of

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.

How to get a fixed price

A couple of clear pictures is all it takes. It helps if you send:

  • One sharp close-up of the damage
  • What it’s made of, if you know
  • Natural light rather than flash
  • Details of any past repairs

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. You will get a fixed quote, not an estimate.

What we can’t put right

It helps to know what we can’t do too:

  • Tiles that move, until they’re refixed
  • Movement in the bath or tray
  • Hidden water damage

If in doubt, send pictures and we will say what we think before you book.

Surfaces we repair

  • Basins & vanity units
  • Kitchen worktops & sinks
  • Baths
  • Wet rooms
  • Shower trays & enclosures

Is resealing worth it?

Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Same prices wherever you are
  • We’ll tell you if it’s not worth repairing
  • One-year guarantee on every repair

Take a look at our full price list.

Where we work around Stormontfield

Stormontfield is about 3 miles north of Perth, in Perth and Kinross. From the centre of Stormontfield to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Stormontfield is one of 107 towns and villages in Perth and Kinross we cover. We work right across the region, from Stormontfield to Edinburgh (36 miles away).

Jobs in PH2 are booked in the same way as anywhere else. Nearby, we also work in Luncarty (1 mile west), Guildtown (2 miles north-east), Stanley (2 miles north), Tulloch (3 miles south) and Scone (3 miles south-east). Larger places within reach include Perth (3 miles south), Blairgowrie and Rattray (11 miles north-east), Auchterarder (14 miles south-west), Letham (3 miles south), Alyth (15 miles north-east) and Coupar Angus (10 miles north-east).

Local landmarks in Stormontfield

We visit homes around Bertha Park High School and the streets around them. The nearest railway station is Perth station, roughly 3.9 miles south of the centre. Other landmarks nearby include Murray Royal Hospital (3.5 miles south) and St John's Shopping Centre (3.6 miles south). Open spaces near Stormontfield include Kinnoull Hill.

Map of Stormontfield © OpenStreetMap contributors

Stormontfield: your questions answered

Will there be a smell?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum.

Can I get a quote without a visit?

In nearly every case. If pictures don’t show enough, we’ll ask for another angle.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is the work guaranteed?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Can you repair several things at once?

Yes, and it’s often cheaper. Just add the extra items to your pictures and we will quote them together.

Can landlords book you?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Perth and Kinross.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

How quickly can you book me in?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Aftercare tips

Most damage we see is avoidable. These habits help:

  • Air the room after use
  • Replace the seal when mould sets in
  • Run the extractor fan during and after showers
  • Clean the joints with a mild cleaner

Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we will say if you need a builder or plumber.

Different materials, different repairs

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

What happens on the day

We begin by going over the job with you. After that, protection goes down around the work area and we start. It normally takes about two hours for a bath, and we will tell you if anything changes.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

How to prepare

  • Keep pets and children out of the room while we work
  • Ensure the area is dry
  • Keep a parking space free if you can

Get a quote

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower, we can price the job without visiting.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.