Hampshire · England
Bath Re-enamelling in Trotton Marsh
Damaged bath in Trotton Marsh? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
For landlords and businesses
If you manage property in Trotton Marsh, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Bath re-enamelling at your home in Trotton Marsh
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include enamel that’s lost its shine and feels rough and worn patches where water runs and sits, across Victorian roll-tops, cast iron baths and basins & shower trays.
Big or small, you get the same one-year guarantee in Trotton Marsh and across Hampshire.
- Area
- Trotton Marsh (GU30, GU31)
- County
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Trotton Marsh
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Repair or replace in Trotton Marsh?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before booking.
Why book with us
- One price list for the entire UK
- Colours mixed by hand to suit your surface
- Nothing taken out or refitted
- Honest advice, even when it means no job
Read our pricing or resurfacing vs replacement cost guide.
Do you need bath re-enamelling in Trotton Marsh?
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
The things customers usually mention when they call are:
- Several chips and rust patches
- Enamel that’s lost its shine and feels rough
- A coloured bath you want in white
- Worn patches where water runs and sits
What to look for in a quote
- How the room is protected while they work
- A fixed quote, and whether VAT is included
- How to look after the finish
- Whether the colour is mixed to match
About Trotton Marsh
Trotton Marsh is about 5 miles east of Petersfield, in Hampshire. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. We cover 683 places across Hampshire, from the larger towns to small villages. We work right across the region, from Trotton Marsh to London (45 miles away).
Our visits in GU30 and GU31 are booked in the same way as anywhere else. Close by, we cover Borden (1 mile west), Milland (1 mile north), Chithurst (1 mile south-east), Rogate (2 miles south-west) and Rake (3 miles north-west). Further out, we also cover Havant (13 miles south-west), Horndean (12 miles south-west), Alton (11 miles north-west), Waterlooville (13 miles south-west), Petersfield (5 miles west) and Purbrook (14 miles south-west).
Local landmarks in Trotton Marsh
The closest station to Trotton Marsh is Liphook station, roughly 3.7 miles north of the centre. Well-known places in the area include Midhurst Museum (4 miles south-east) and Midhurst Community Hospital (3.8 miles south-east). For a walk, there’s Iping and Stedham Commons and Wheeler's Down.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
How to look after the repair
So the finish stays in good condition:
- Do not leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
- Do not leave a chip unrepaired
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What we do, step by step
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes the best part of a day in most cases. The room is left tidy and you will know when it can be used.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Open a window if you can
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
How to get a price
The quickest way to a price is to send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Read more
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Also in Trotton Marsh
Questions from Trotton Marsh
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you work in Trotton Marsh?
Yes. We cover the whole UK and come to Trotton Marsh. Send us pictures for a fixed quote, or call 0345 017 0787.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
About our accreditations · Every repair comes with a one-year guarantee.
