Flintshire · England

Bath Resealing in Walwen

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Walwen and across Flintshire. Free, fixed quotes from your pictures.

  • Gaps in the seal
  • Mould you cannot clean out
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Walwen

Work for landlords and builders

Landlords, letting agents and housing providers in Walwen use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Bath resealing at your home in Walwen

A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. If you are dealing with leaks at the edges and stained silicone, we can generally put it right.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Area
Walwen (CH6, CH8)
County
Flintshire
Guarantee
A year, on every repair
Quotes
Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

How to look after the repair

So the finish stays in good condition:

  • Clean the joints with a mild cleaner
  • Reseal at the first sign of lifting
  • Keep bottles off the joints
  • Use the extractor fan

Leave the sealant to cure for the time we give you, normally about a day.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we will tell you if it needs a builder or plumber.

What we can’t put right

It helps to know what we can’t do:

  • Gaps too big for silicone alone
  • Rotten walls or floors behind the bath
  • Tiles that move, until they’re refixed

Send us pictures and we’ll tell you honestly before you book.

Materials we repair

  • Basins & vanity units
  • Shower trays & enclosures
  • Baths
  • Wet rooms
  • Kitchen worktops & sinks

FAQs for Walwen

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Flintshire.

Do you seal over the old sealant?

No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.

Do you cover Walwen?

Yes. We cover the entire UK and travel to Walwen and the rest of Flintshire. Send us photos for a fixed quote, or call 0345 017 0787.

Can you quote from photos?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Will the price change on the day?

Your quote covers the damage in the photos. If there is more, we will tell you before starting.

When can I use the bath after resealing?

Usually after around 24 hours. We confirm before we leave.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.

What happens once I’ve sent pictures?

We review the pictures and send a fixed quote and the next dates we have.

Is resealing worth it?

A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

Why choose Surface Doctor in Walwen

  • Generally one visit, start to finish
  • Straight answers about what a repair can do
  • No extra charge for your area
  • A fixed quote before booking

Take a look at our pricing.

Prices and what affects them

Prices are worked out job by job. What matters most is:

  • The material and finish
  • The size and number of damaged areas
  • Whether old repairs or coatings need taking off
  • What kind of damage it is

We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from pictures

Good photos mean an accurate price. Here’s what helps:

  • Your postcode, so we can check dates
  • One picture of the entire bath or shower
  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Walwen and nearby

Walwen is about 4 miles north-west of Flint, in Flintshire. We travel to clients in Walwen and the surrounding area, so you do not need to take anything anywhere. Our technicians cover all 139 towns and villages in Flintshire, from the larger towns to small villages. Our nearest city page is Liverpool, about 14 miles away.

Our repair technicians cover all of CH6 and CH8 and the streets around it. We regularly work on streets such as Upper River Bank, Llys Maesteg and Bagillt Road. We also cover the places around Walwen: Whelston (1 mile south-east), Gadlys (1 mile south), Bagillt (2 miles south-east), Nant-bâch (2 miles south) and Halkyn (3 miles south). Larger places within reach include Connah's Quay (7 miles south-east), Buckley (9 miles south-east), Bwcle (9 miles south-east), Saltney (13 miles south-east), Mold (8 miles south) and Lache (14 miles south-east).

Near you in Walwen

Around Walwen, we work in homes near Ysgol Glan Aber C.P., Holy Trinity Church and The Victoria Inn. Walwen’s nearest station is Flint station, roughly 3.3 miles south-east of the centre. Other landmarks nearby include Holywell Community Hospital (1.3 miles south-west) and St Winefride's Well Museum (1.2 miles west). For a walk, there’s Cefn.

Map of Walwen © OpenStreetMap contributors

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a couple of hours. If we find something your photos didn’t show, we will explain it before carrying on.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Getting ready for the visit

  • Point us to the nearest place to park
  • Let us know about parking or access
  • Move bottles, mats and clutter away from the area

Get a quote

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a fixed quote

Advice

Different materials, different repairs

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

When to call us in Walwen

Joints split if the bath or tray moves, often because it was sealed with the bath empty.

Customers usually contact us about:

  • A messy previous reseal
  • Black mould in the sealant
  • Silicone coming away from the tiles
  • Gaps by the taps

Questions to ask before you book

  • Whether cleaning and preparation are in the price
  • Whether the price is fixed and includes VAT
  • What protection goes down before work starts
  • Whether there are any call-out or travel charges

10 questions to ask before you book

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.