Somerset · England

Bath Resealing in Woolmersdon

Bath, shower and sink resealing with new mould-resistant silicone at your home in Woolmersdon, with a one-year guarantee on every repair.

  • Mould you cannot clean out
  • Damp near the bath
  • Stained silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Woolmersdon

Bath resealing in Woolmersdon without replacing anything

Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. Most jobs take a couple of hours, plus curing time. We work on basins & vanity units, kitchen worktops & sinks and wet rooms, and people most often call us about silicone coming away from the tiles and discoloured, yellow sealant.

You get a one-year guarantee, the same in Woolmersdon as everywhere else we work.

Where
Woolmersdon (TA5)
County
Somerset
Warranty
One year on every repair
Quote
Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What affects the price in Woolmersdon

Each job gets its own fixed price. These are the things that affect it:

  • Access to the area
  • Whether it’s a chip, crack, burn or wear
  • Previous DIY repairs that have to come out
  • The size and number of damaged areas

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Send pictures for a quote

Phone photos are fine, there is no need for anything special. Make sure they show:

  • Something in shot to show the size
  • Daylight if possible, and no flash reflection
  • Any details about the material
  • Where you are, by postcode

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.

How to look after the repair

Looking after the surface is easy, and it makes a real difference:

  • Replace the seal when mould sets in
  • Keep the joints dry
  • Run the extractor fan during and after showers
  • Clean the sealant gently and regularly

Keep the room well ventilated, and wipe the joints after use.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Can I fix it myself?

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

What we cannot put right

Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:

  • Movement in the bath or tray
  • Gaps too big for silicone alone
  • Hollow or loose tiles

Not sure? Send photos and we will give you a straight answer before booking.

Materials we repair

  • Basins & vanity units
  • Wet rooms
  • Baths
  • Kitchen worktops & sinks
  • Shower trays & enclosures

Your questions about bath resealing in Woolmersdon

Are there extra charges for Woolmersdon?

Travel is included in the price, with the same prices everywhere we work.

How long does silicone take to cure?

We will give you the curing time.

My seal keeps tearing. Why?

The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Do you cover the entire of Somerset?

We work UK-wide. Our prices are the same everywhere.

Do you work in Woolmersdon?

We do. We send a technician to Woolmersdon for every job, and the price is the same as everywhere else.

Do you seal over the old sealant?

No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

How it works

You don’t need to empty the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It generally takes about two hours for a bath, and you can get on with other things while we’re there.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Tell us about any previous repairs or coatings
  • Tell us about parking, stairs or access

Getting a price

Email us a photo of the damage and one of the entire item, with your TA5 postcode, and we’ll come back with a fixed quote.

Get a free quote

Related advice

What your bath or shower is made of matters

Baths

We fill the bath before sealing, to open the joint fully.

Shower trays

Trays are sealed with weight on them, for the same reason.

Do you need bath resealing in Woolmersdon?

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.

The most common problems we are called about are:

  • Leaks at the edges
  • Sealant that is split or lifting
  • Missing sealant behind the taps
  • Black mould in the sealant

Before booking anyone

  • Whether cleaning and preparation are in the price
  • The length of the guarantee and what it covers
  • A fixed price, and whether VAT is included
  • Whether the colour is mixed to match

Choosing a repair company

Work for landlords and builders

For anyone letting property in or around Woolmersdon, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.

For developers and builders, we fix damage before handover. Several plots can be done in one visit.

Woolmersdon and the surrounding area

Woolmersdon is about 2 miles south-west of Bridgwater, in Somerset. Our technicians come to homes and businesses in Woolmersdon and nearby villages, so there is no workshop to go to. Woolmersdon is one of 640 towns and villages in Somerset we cover.

All of TA5 is within our area. We also travel to Rhode (1 mile north-west), Compass (1 mile east), Durleigh (1 mile north-west), Bridgwater (2 miles north-east) and Wembdon (2 miles north). Larger places within reach include Taunton (7 miles south-west), Burnham-on-Sea (10 miles north), Wellington (12 miles south-west), Street (12 miles east), Glastonbury (14 miles east) and Sydenham (3 miles north-east).

Local landmarks in Woolmersdon

In Woolmersdon, that means homes near North Petherton Primary School, The Globe Inn and Church of St Mary. For rail, the closest station is Bridgwater station, roughly 2.5 miles north-east. Other landmarks nearby include Bridgwater Castle (2.3 miles north-east) and Bridgwater Community Hospital (3.6 miles north-east).

Map of Woolmersdon © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.