Somerset · England

Bath re-enamelling & resurfacing in Woolmersdon, Somerset

Bath re-enamelling in Woolmersdon without the cost of replacing. Get a fixed quote from your pictures, then we come to you.

  • Resurfacing from £350
  • A dull, rough surface that won’t come clean
  • Stains that won’t shift
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Woolmersdon homes

Bath re-enamelling in Woolmersdon without replacing anything

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s stains that won’t shift and worn patches where water runs and sits, we can generally put it right, whatever the material.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Before and after: an old basin refinished to bright white
Area
Woolmersdon (TA5)
County
Somerset
Warranty
12 months on all our work
Price
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Repair or replace in Woolmersdon?

Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the next day. Prices start from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Why Woolmersdon customers choose us

  • CHAS, Constructionline and SafeContractor accredited
  • Colour-matched on site
  • Work done at your home or business
  • Honest advice, even when it means no job

Read our pricing or resurfacing vs replacement cost guide.

Can I fix it myself?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

What your bath is made of matters

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Questions from Woolmersdon

Can you make a coloured bath white?

Yes, white is the usual choice. Mention the colour you want when you send pictures.

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Do you come to Woolmersdon?

Yes. We cover the whole UK and come to Woolmersdon and the rest of Somerset. Send us photos for a fixed quote, or call 0345 017 0787.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

How long is the bath unusable?

Normally one day, with the bath ready the next day. A badly pitted bath can need a second day.

Will there be fumes?

Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.

Which areas do you work in?

We cover the whole UK, including Woolmersdon and the rest of Somerset. Send your postcode with your photos and we will confirm dates.

What do you need from me?

Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.

Our work in Woolmersdon

Woolmersdon is about 2 miles south-west of Bridgwater, in Somerset. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Woolmersdon is one of 640 places in Somerset we cover.

All of TA5 is covered. If you’re just outside Woolmersdon, we cover Rhode (1 mile north-west), Compass (1 mile east), Durleigh (1 mile north-west), Bridgwater (2 miles north-east) and Wembdon (2 miles north). Within a short drive, we also cover Taunton (7 miles south-west), Burnham-on-Sea (10 miles north), Wellington (12 miles south-west), Street (12 miles east), Glastonbury (14 miles east) and Sydenham (3 miles north-east).

Local landmarks in Woolmersdon

Around Woolmersdon, we work in homes near North Petherton Primary School, The Globe Inn and Church of St Mary and the streets around them. The closest station to Woolmersdon is Bridgwater station, roughly 2.5 miles north-east. Other landmarks nearby include Bridgwater Castle (2.3 miles north-east) and Bridgwater Community Hospital (3.6 miles north-east).

Map of Woolmersdon © OpenStreetMap contributors

What we cannot put right

A few problems are outside what a surface repair can do:

  • A poorly supported acrylic bath, until it’s firmed up
  • Leaking taps or wastes (a plumber’s job)
  • A bath split right through the body

Send us pictures and we will tell you honestly.

Surfaces we repair

  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths

When to call us in Woolmersdon

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.

Common reasons people in Woolmersdon contact us include:

  • A coloured bath you want in white
  • A period or roll-top bath worth keeping
  • Wear marks under the taps
  • A bath that stays dull however much you clean it

Comparing quotes

  • How the room is protected while they work
  • Whether a trained technician does the job
  • What the guarantee covers, and for how long
  • Whether the colour is mixed to match

10 questions to ask before booking

For landlords and businesses

We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.

If you manage property in Woolmersdon, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.

What affects the price in Woolmersdon

Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:

  • The size and number of damaged areas
  • Whether old repairs or coatings need taking off
  • What the surface is made of
  • The type of damage

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed price

Most quotes are done from photos alone. To help us price it:

  • Whether it’s been repaired or coated before
  • Any details about the material
  • Your postcode, so we can check dates
  • A picture taken from further back

The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.

How the visit works

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

How to prepare

  • Let us know which floor the room is on
  • Tell us about parking, stairs or access
  • Keep pets and children out of the room while we work

Getting a price

Send us a photo of the damage and one of the whole item, and tell us you’re in Woolmersdon, and we will come back with a fixed quote.

Get a fixed price

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.