Perth and Kinross · Scotland
Non-Slip Bath Coating for Acharn homes
Clear non-slip coatings for baths and shower trays at your home in Acharn, with a one-year guarantee on every repair.
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people
Non-slip bath coating in Acharn, done in place
It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. We regularly repair resurfaced baths, wet room floors (ask us) and enamelled baths, and the jobs we see most are a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Acharn (PH15)
- County
- Perth and Kinross
- Warranty
- 12 months on all our work
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Acharn?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Free fixed quotes from pictures
- Nothing taken out or refitted
- Dust sheets down, tidy finish
- We will tell you if it’s not worth repairing
Read our full price list.
Towns and villages near Acharn
Also in Acharn
Honest limits
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly before you book.
Materials we work on in Acharn
- Resurfaced baths
- Acrylic baths
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
What affects the price in Acharn
We give every job a fixed price from pictures. These are the things that affect it:
- How many items we do on one visit
- Unusual colours or finishes
- How much damage there is
- Whether it’s a chip, crack, burn or wear
A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Getting a price from pictures
Two or three clear photos are normally enough. Try to include:
- One picture of the whole bath or shower tray
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Landlord and trade work in Acharn
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
How it works
Arrival times are agreed in advance. On site, it takes a morning or an afternoon. The room is left tidy and you will know when it can be used.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, generally overnight.
How to prepare
- Let us know about parking or access
- Let us know which floor the room is on
- Clear the area around the damage
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
Common problems we fix in Acharn
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Comparing quotes
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
- What happens if the damage is worse than the pictures show
- If travel is included in the price
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
FAQs for Acharn
Do you work in Acharn?
Yes, we do. Technicians travel to Acharn from across the region, and the price is the same as everywhere else.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed price includes everything.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
What happens once I’ve sent pictures?
You’ll get a fixed quote back, typically with dates to choose from. You are under no obligation.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
About Acharn
Acharn is about 25 miles north-west of Perth, in Perth and Kinross. From the centre of Acharn to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Acharn is one of 107 places in Perth and Kinross where we work. We work right across the region, from Acharn to Glasgow (about 51 miles away).
We work across PH15. We also cover the places around Acharn: Kenmore (1 mile north-east), Fearnan (2 miles west), Boreland (3 miles west), Aberfeldy (7 miles north-east) and Little Ballinluig (11 miles north-east). Larger places within reach include Crieff (15 miles south-east), Pitlochry (14 miles north-east) and Comrie (14 miles south).
Near you in Acharn
In Acharn, that means homes near Kenmore Parish Church. Nearby you’ll also find Taymouth Castle (1.5 miles north-east) and Scottish Crannog Centre (0.8 miles north-east). The countryside around Acharn includes Drummond Hill.
About our accreditations · Every repair comes with a one-year guarantee.
