Argyll and Bute · Scotland
Non-slip bath & shower coating in An Tairbeart, Argyll and Bute
Non-slip bath coating in An Tairbeart without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. We charge the same wherever you are, with no extra for An Tairbeart. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- We’ll tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before you book
- Most jobs done in one visit
Take a look at our prices page.
Non-slip bath coating at your home in An Tairbeart
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. Our repair technicians work on acrylic baths, resurfaced baths and wet room floors (ask us), and the jobs we see most are safety for older or less mobile people and resurfaced baths that are now too smooth.
Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Area
- An Tairbeart (PA29)
- Area hub
- Argyll and Bute
- Cover
- 12 months on all our work
- Price
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near An Tairbeart
More services for An Tairbeart
What non-slip bath coating costs
You’ll know the full cost before booking. We look at:
- The type of damage
- Any earlier repairs that need removing first
- Doing more than one item at once
- How easy the damage is to reach
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
You can take the pictures on your phone, there’s no need for anything special. Ensure they show:
- Whether it’s been repaired or coated before
- One picture of the entire bath or shower tray
- Where you are, by postcode
- Daylight if possible, and no flash reflection
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
FAQs for An Tairbeart
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
What happens once I’ve sent photos?
You get a fixed price and available dates. If we need another angle, we’ll ask.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Which areas do you work in?
Everywhere in the UK, An Tairbeart included. There is no extra charge for travel.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Argyll and Bute.
Do the materials smell?
Expect a mild smell while we are working, which fades afterwards.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Covering An Tairbeart
An Tairbeart (Gaelic: Tarbert) is about 25 miles west of Greenock, in Argyll and Bute. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. An Tairbeart is one of 118 towns and villages in Argyll and Bute where we work. You can also see our page for Glasgow, about 44 miles away.
Postcode districts we cover here: PA29. From Market Place, Castle Street and Kintyre Place or a nearby road, a technician can come to you. You’ll find An Tairbeart on the A8015, which makes it straightforward to reach. If you’re just outside An Tairbeart, we cover Whitehouse (5 miles south-west), Kames (7 miles east), Tighnabruaich (7 miles north-east), Clachan (10 miles south-west) and Ardrishaig (11 miles north). Within a short drive, we also cover Rothesay (14 miles east), Ceann Loch Gilb (12 miles north), Lochgilphead (12 miles north) and Port Bannatyne (13 miles east). Remote and island addresses take a little more planning, so call us to arrange it.
Local landmarks in An Tairbeart
We visit homes around Tarbert, among other places. Further afield, we also cover the area around Tarbert Castle (within half a mile east). For a walk, there’s Lochan Liath and Cruach an t-Sorchain.
For landlords and businesses
Landlords, letting agents and housing providers in An Tairbeart use us as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
If you manage property in An Tairbeart, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.
When a repair isn’t the answer
In fairness, there are a few things a repair won’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly.
What we work on
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
- Resurfaced baths
- Enamelled baths
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for a few hours from start to finish. Before we go, we’ll explain when it can be used and how to care for it.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Make sure the area is dry
- Keep pets and children out of the room while we work
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job the same day in most cases.
Advice
Do you need non-slip bath coating in An Tairbeart?
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
People typically call us when they notice one of these:
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Comparing quotes
- What prep work is covered
- How to care for the finish
- Whether the colour is mixed to match
- Whether the price covers travel
About our accreditations · Every repair comes with a one-year guarantee.
