Argyll and Bute · Scotland
Non-slip bath & shower coating in Kames, Argyll and Bute
We travel to Kames for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
Landlord and trade work in Kames
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
If you manage property in Kames, we will quote for several properties at once. Send pictures for each one and we will price them together.
Non-slip bath coating at your home in Kames
It’s a clear, textured coating, so the bath looks much the same. It’s popular with older people, families and holiday lets. Whether it’s safety for older or less mobile people and worn-out textured areas, we can typically put it right.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Where
- Kames (PA21)
- Region
- Argyll and Bute
- Guarantee
- 12 months on all our work
- Price
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price non-slip bath coating
There is no area surcharge for Kames. The price reflects:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- How many items we do on one visit
- What kind of damage it is
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
We price nearly every job from photos. This is what we need:
- One picture of the entire bath or shower tray
- Whether it’s been repaired or coated before
- Any details about the material
- Good light, ideally daylight, without flash glare
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
What we do, step by step
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. You can expect it to take a few hours, and we will keep you posted as we go.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
- Let us know about parking or access
Get a quote
To get a price, send a couple of photos through our quote form or call us. We will say straight away whether it can be repaired.
Advice
Covering Kames
Kames is about 19 miles west of Greenock, in Argyll and Bute. Across the PA21 area, we carry out the work at your property. Our technicians cover 118 places across Argyll and Bute, from the larger towns to small villages. Our jobs stretch from Kames to Glasgow (about 38 miles away).
All of PA21 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Tighnabruaich (1 mile north), An Tairbeart (7 miles west), Port Bannatyne (7 miles east), Ardbeg (8 miles east) and Rothesay (8 miles south-east). Larger places within reach include Dunoon (13 miles east), Ceann Loch Gilb (12 miles north-west), Lochgilphead (13 miles north-west), Ardrishaig (11 miles north-west), Sandbank (13 miles north-east) and Innellan (11 miles east). If you’re somewhere remote, call first so we can plan the visit.
What’s near Kames
Typical jobs here are in homes near Kames. For a walk, there’s Cnoc Dubh and Asgog Loch.
What we cannot put right
To be straight with you, there are a few things a repair will not fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Wet room floors (ask us)
- Enamelled baths
- Acrylic baths
- Resurfaced baths
- Shower trays
Repair or replace in Kames?
The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Technicians who travel to you, UK-wide
- Fixed prices from your photos
- Most jobs done in one visit
Take a look at our pricing.
FAQs for Kames
What areas do you cover?
The entire UK, including all of Argyll and Bute. Just include your postcode and we will confirm dates.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can you repair something that’s been repaired before?
Generally, yes. We remove the old repair before doing a new one.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Do you come to Kames?
Yes. We cover the entire UK and come to Kames. Send us pictures for a fixed quote, or call 0345 017 0787.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Do you need non-slip bath coating in Kames?
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Common reasons people in Kames contact us are:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
What your quote should include
- A fixed price, and whether VAT is included
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- Aftercare advice
What else we do in Kames
About our accreditations · Every repair comes with a one-year guarantee.
