Argyll and Bute · Scotland
Non-slip bath & shower coating in Whitehouse, Argyll and Bute
Clear non-slip coatings for baths and shower trays for homes and businesses in Whitehouse and across Argyll and Bute. Free, fixed quotes from your photos.
- Worn-out textured areas
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Whitehouse and the surrounding area
Whitehouse (Gaelic: Glac a' Mhuilinn) is about 29 miles west of Saltcoats, in Argyll and Bute. Across the PA29 area, we come to you. Whitehouse is one of 118 towns and villages in Argyll and Bute we cover. You can also see our page for Glasgow, about 47 miles away.
Postcode districts we cover here: PA29. Neighbouring places we cover include Clachan (5 miles south-west), An Tairbeart (5 miles north-east), Lochranza (10 miles south-east), Pirnmill (11 miles south) and Kames (11 miles north-east). Some remote addresses need extra planning, so call us to arrange it.
Near you in Whitehouse
Other landmarks nearby include Loup House (4 miles south-west). For a walk, there is Lochan Liath and Cruach na Caol-bheinn.
How we handle non-slip bath coating in Whitehouse
It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. We regularly repair wet room floors (ask us), shower trays and enamelled baths, and the jobs we see most are a bath or tray that is slippery when wet and resurfaced baths that are now too smooth.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Whitehouse (PA29)
- Area hub
- Argyll and Bute
- Warranty
- 12 months on all our work
- Quote
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
It helps to know what we can’t do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Shower trays
- Wet room floors (ask us)
- Acrylic baths
- Resurfaced baths
- Enamelled baths
How the visit works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for a morning or an afternoon from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
Ask for a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Related advice
What affects the price in Whitehouse
You’ll know the full cost before you book. We look at:
- Previous DIY repairs that have to come out
- The type of damage
- How many areas need work
- The material
We charge the same wherever you are, so there is no premium for Whitehouse. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
Two or three clear photos are usually enough. Try to include:
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- Any earlier repairs or coatings
- A photo taken from further back
Most customers in Whitehouse get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Signs you need non-slip bath coating in Whitehouse
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Most people get in touch when they notice something like this:
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Worn-out textured areas
Questions to ask before booking
- How to care for the finish
- How your room will be protected
- How the colour is matched
- How changes to the job are handled
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Whitehouse clients choose us
- One price list for the entire UK
- Typically one visit, start to finish
- Rooms protected and left tidy
- Repair technicians who travel to you, UK-wide
Read our full price list.
Your questions about non-slip bath coating in Whitehouse
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
How much does non-slip bath coating cost in Whitehouse?
The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
How do I book?
Photos of the damage, a photo of the entire bath or shower tray and your postcode. After that, we just agree a date.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
It’s been repaired before. Can you still fix it?
Typically, yes. The old repair comes out first.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Nearby places to Whitehouse
What else we do in Whitehouse
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Argyll and Bute and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
