Perth and Kinross · Scotland
Non-slip bath & shower coating in Balbeggie, Perth and Kinross
We travel to Balbeggie for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Non-slip bath coating in Balbeggie without replacing anything
The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, on wet room floors (ask us), resurfaced baths and acrylic baths.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Area
- Balbeggie (PH2)
- Region
- Perth and Kinross
- Cover
- 12 months on all our work
- Quotes
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, typically overnight.
Getting ready for the visit
- Let us know about parking or access
- Clear the area around the damage
- Keep pets and children out of the room while we work
How to get a price
Most customers in Balbeggie get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
Other services in Balbeggie
What we cannot put right
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
Materials we work on in Balbeggie
- Enamelled baths
- Wet room floors (ask us)
- Acrylic baths
- Resurfaced baths
- Shower trays
Common questions in Balbeggie
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
What does non-slip bath coating cost?
We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your PH2 postcode.
Do you cover Balbeggie?
Yes. We cover the whole UK and travel to Balbeggie. Send us photos for a fixed quote, or call 0345 017 0787.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you cover the entire of Perth and Kinross?
The whole UK, including all of Perth and Kinross. Send your postcode with your pictures and we’ll confirm dates.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
What non-slip bath coating costs
There’s no charge for travel to Balbeggie. The price depends on:
- Any earlier repairs that need removing first
- How much damage there is
- The type of damage
- Access to the area
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
You can generally get a fixed quote without us visiting. To make it quick:
- One sharp close-up of the damage
- A wider photo showing the whole bath or shower tray
- Good light, ideally daylight, without flash glare
- Any details about the material
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Landlords, agents and businesses in Balbeggie
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We work for landlords, letting agents and housing providers in Balbeggie as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Why Balbeggie customers choose us
- Honest advice, even when it means no job
- Fixed prices from your pictures
- Everything repaired in place
- Rooms protected and left tidy
See our prices page.
Common problems we fix in Balbeggie
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Signs it’s time to call us include:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
What to look for in a quote
- What happens if the damage is worse than the pictures show
- Who will actually do the work
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
Where we work around Balbeggie
Balbeggie is about 5 miles north-east of Perth, in Perth and Kinross. Our repair technicians come to customers in Balbeggie and nearby villages, so you don’t need to take anything anywhere. We work in all 107 towns and villages across Perth and Kinross, from the larger towns to small villages. You can also see our page for Edinburgh, about 35 miles away.
Every address in PH2 is within our area. From Beechgrove, Armadale Crescent and St Martins Road or a nearby road, we can come to you. Nearby, we also work in Kinrossie (2 miles north-east), Wolfhill (3 miles north), Guildtown (3 miles north-west), Scone (3 miles south-west) and Stormontfield (4 miles west). Within a short drive, we also cover Perth (5 miles south-west), Blairgowrie and Rattray (10 miles north), Letham (6 miles south-west), Tulloch (5 miles south-west), Alyth (13 miles north) and Coupar Angus (7 miles north-east).
Landmarks near Balbeggie
In Balbeggie, that means homes near Balbeggie, among other places. Well-known places in the area include Inchbervis Castle (3.6 miles north-west) and Perth Royal Infirmary (4.2 miles south-west). Not far away are Dunsinane Hill.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
