Perth and Kinross · Scotland

Bath Resealing for Balbeggie homes

Local bath resealing for Balbeggie: photo quotes, tidy work and a year’s guarantee.

  • An untidy old seal
  • Black mould in the sealant
  • Silicone coming away from the tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Balbeggie homes

Bath resealing in Balbeggie without replacing anything

Baths are resealed with water in them, so the joint opens fully, which stops the new seal tearing the first time the bath is used. If you’re dealing with black mould in the sealant and a messy previous reseal, we can typically put it right.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Location
Balbeggie (PH2)
Region
Perth and Kinross
Guarantee
A year, on every repair
Quotes
Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Signs you need bath resealing in Balbeggie

Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.

Clients typically contact us about:

  • Missing sealant behind the taps
  • Silicone smeared on tiles
  • Sealant that is split or lifting
  • Mould you cannot clean out

What your quote should include

  • How the colour is matched
  • What happens if the damage is worse than the pictures show
  • How long the guarantee is and what it covers
  • Whether the price covers travel

Our hiring checklist

Looking after it afterwards

To keep it looking its best:

  • Wipe the joints dry after use
  • Let steam out after showers
  • Run the extractor fan during and after showers
  • Reseal when black spots won’t clean off

Leave the sealant to cure for the time we give you, normally around 24 hours.

Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.

What your bath or shower is made of matters

Baths

Baths are resealed with water in them, to open the joint fully.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Can I fix it myself?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

What we do, step by step

Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take around two hours, and we leave the room as we found it.

  1. We cut out and remove all of the old sealant.
  2. We clean the joint and treat any mould.
  3. We make sure the joint is completely dry.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Mention if the room is upstairs or in a flat
  • Have a window or extractor fan available

Get a quote

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a free quote

Read more

How we price bath resealing

There’s no area surcharge for Balbeggie. What changes the price is:

  • How hard the colour is to match
  • What the surface is made of
  • How many areas need work
  • Any earlier repairs that need removing first

Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Quotes from your photos

Phone pictures are fine. Just make sure we can see:

  • Details of any past repairs
  • The postcode, so we can plan the visit
  • A coin or ruler next to the damage for scale
  • Any details about the material

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Balbeggie and the surrounding area

Balbeggie is about 5 miles north-east of Perth, in Perth and Kinross. From the centre of Balbeggie to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Balbeggie is one of 107 places in Perth and Kinross we cover. Our jobs stretch from Balbeggie to Edinburgh (about 35 miles away).

Our technicians cover all of PH2 and the streets around it. That includes homes on Beechgrove, Armadale Crescent and St Martins Road and the roads around them. We also travel to Kinrossie (2 miles north-east), Wolfhill (3 miles north), Guildtown (3 miles north-west), Scone (3 miles south-west) and Stormontfield (4 miles west). Further out, we also cover Perth (5 miles south-west), Blairgowrie and Rattray (10 miles north), Letham (6 miles south-west), Tulloch (5 miles south-west), Alyth (13 miles north) and Coupar Angus (7 miles north-east).

Near you in Balbeggie

Typical jobs here are in homes near Balbeggie and the streets around them. Further afield, we also cover the area around Inchbervis Castle (3.6 miles north-west) and Perth Royal Infirmary (4.2 miles south-west). The countryside around Balbeggie includes Dunsinane Hill.

Map of Balbeggie © OpenStreetMap contributors

When a repair is not the answer

Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:

  • Gaps too big for silicone alone
  • Hidden water damage
  • A flexing bath

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Basins & vanity units
  • Wet rooms
  • Shower trays & enclosures
  • Baths
  • Kitchen worktops & sinks

For landlords and businesses

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

We’re used to working with agents and managing companies. Send the address, pictures and access details.

Questions from Balbeggie

Is there a guarantee?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

Can I add another job to the visit?

Of course, and it normally saves money. Just add the extra items to your pictures and you will get one combined price.

Is there a call-out fee?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Is it worth repairing rather than replacing?

Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.

How long will it take?

Generally a couple of hours, then it needs to cure.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

It’s been repaired before. Can you still fix it?

Usually, yes. We remove the old repair before doing a new one, so mention it when you send photos.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.