Perth and Kinross · Scotland

Non-Slip Bath Coating in Carsie

Non-slip bath coating in Carsie without the cost of replacing. Send us pictures for a fixed quote, then we come to you.

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Carsie homes

Landlords, agents and businesses in Carsie

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.

Non-slip bath coating at your home in Carsie

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. We are frequently asked to fix bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, in acrylic baths, wet room floors (ask us) and enamelled baths.

All our work comes with our one-year guarantee, wherever you are in Perth and Kinross. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Area
Carsie (PH10)
County
Perth and Kinross
Warranty
12 months on all our work
Quotes
Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What affects the price in Carsie

Every quote is fixed and free. What we look at:

  • What the surface is made of
  • How many areas need work
  • Whether old repairs or coatings need taking off
  • The colour and finish to match

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.

How to get a fixed price

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale
  • Daylight if possible, and no flash reflection
  • The postcode, so we can plan the visit

To get a price, send a couple of pictures through our quote form or call us. We will say right away whether it can be repaired.

Where we work around Carsie

Carsie is about 2 miles south of Blairgowrie and Rattray, in Perth and Kinross. Our repair technicians come to homes and businesses in Carsie and the surrounding area, so there’s no workshop to go to. Carsie is one of 107 places in Perth and Kinross where we work. Our nearest city page is Edinburgh, about 43 miles away.

Postcode districts we cover here: PH10. Local streets include Pine Grove, Blackloch Crescent and Fraser Avenue, and we cover them all. We also cover the places around Carsie: Blairgowrie and Rattray (2 miles north), Rattray (2 miles north-east), Kinloch (2 miles north-west), Meikleour (2 miles south-west) and Coupar Angus (3 miles south-east). Within a short drive, we also cover Perth (12 miles south), Letham (12 miles south-west), Scone (10 miles south), Tulloch (12 miles south-west), Alyth (6 miles north-east) and Oakbank (13 miles south).

Landmarks near Carsie

Our customers here include homes close to Blairgowrie High School and the streets around them. Further afield, we also cover the area around Blairgowrie Community Hospital (1.3 miles north) and Lethendy House (2 miles west). Not far away are Black Loch.

Map of Carsie © OpenStreetMap contributors

Questions from Carsie

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

What happens once I’ve sent pictures?

We check the damage, the material and your postcode, then reply with a quote with dates.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Can you repair several things at once?

Of course, and it usually saves money. Send pictures of everything together and we will quote them together.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

Repairing versus replacing in Carsie

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why us?

  • One visit for most repairs
  • One price list for the entire UK
  • Nothing taken out or refitted
  • Honest advice, even when it means no job

Take a look at our pricing.

The process

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We clean up when we’re done and let you know when you can use it again.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Let the surface dry out before the visit
  • Make sure the room can be ventilated
  • Plan for the room to be out of bounds to pets and children

Get a quote

Most clients in Carsie get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed price

Read more

Signs you need non-slip bath coating in Carsie

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

If you can see any of these, send us a photo:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Before booking anyone

  • How soon you can use it again
  • A fixed quote, and whether VAT is included
  • Whether a trained technician does the job
  • How the colour is matched

Choosing a repair company

When a repair is not the answer

We will always be straight with you, so here’s what a repair will not do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think.

What we work on

  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.