Perth and Kinross · Scotland
Bath Repair for Carsie homes
Problem with your bath in Carsie? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Rust by the waste and overflow
- Holes from dropped items
Should you replace it?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. You will see the full price before booking, with nothing added on the day.
Why Carsie clients choose us
- Most jobs done in one visit
- Straight answers about what a repair can do
- Fixed prices from your photos
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page and resurfacing vs replacement cost guide.
How we handle bath repair in Carsie
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Typical jobs include rust spots around the plughole and damage beneath the taps, in cast iron enamel, roll-top & freestanding and pressed steel enamel.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Carsie (PH10)
- County
- Perth and Kinross
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
About Carsie
Carsie is about 2 miles south of Blairgowrie and Rattray, in Perth and Kinross. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Carsie is one of 107 places in Perth and Kinross we cover. Our nearest city page is Edinburgh, about 43 miles away.
Our repair technicians cover all of the PH10 postcode area and the streets around it. We regularly work on streets such as Pine Grove, Blackloch Crescent and Fraser Avenue. Other places close to Carsie include Blairgowrie and Rattray (2 miles north), Rattray (2 miles north-east), Kinloch (2 miles north-west), Meikleour (2 miles south-west) and Coupar Angus (3 miles south-east). Within a short drive, we also cover Perth (12 miles south), Letham (12 miles south-west), Scone (10 miles south), Tulloch (12 miles south-west), Alyth (6 miles north-east) and Oakbank (13 miles south).
Landmarks near Carsie
Typical jobs here are in homes near Blairgowrie High School, among other places. Well-known places in the area include Blairgowrie Community Hospital (1.3 miles north) and Lethendy House (2 miles west). For a walk, there is Black Loch.
Questions from Carsie
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
What areas do you cover?
We work UK-wide, so Carsie is covered. Prices don’t change with location.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Rinse it down after each bath
- Get a dripping tap fixed promptly
- Keep metal cans and razors off the surface
- Get any new chip repaired before it rusts
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The process
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for two to three hours for most chips from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the following day.
How to prepare
- Tell us about parking, stairs or access
- Point us to the nearest place to park
- Let us know which floor the room is on
Getting a price
If you’re in Carsie and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
What we are called out for in Carsie
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.
Customers usually contact us about:
- Deep scratches in acrylic
- Rust by the waste and overflow
- Snagging damage from a refit
- Cracks in an acrylic bath
What to look for in a quote
- What prep work is covered
- What happens if they find more damage
- Who will actually do the work
- Aftercare advice
Nearby places to Carsie
Also in Carsie
When we would advise against a repair
In fairness, there are a few things a repair won’t fix:
- Metal that has corroded all the way through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Carsie
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
