Perth and Kinross · Scotland
Non-slip bath & shower coating in Meikleour, Perth and Kinross
We travel to Meikleour for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.
- Safety for older or less mobile people
- Worn-out textured areas
- Resurfaced baths that are now too smooth
How we handle non-slip bath coating in Meikleour
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for worn-out textured areas and a bath or tray that is slippery when wet, in resurfaced baths, shower trays and wet room floors (ask us).
All our work comes with a one-year guarantee. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Location
- Meikleour (PH2)
- Region
- Perth and Kinross
- Guarantee
- A year, on every repair
- Quote
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Meikleour
Prices are worked out job by job. What matters most is:
- Doing more than one item at once
- How many areas need work
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Send pictures for a quote
Most quotes are done from photos alone. To make it quick:
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- A wider photo showing the entire bath or shower tray
- Natural light rather than flash
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
What happens on the day
We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. It normally takes a morning or an afternoon.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, normally overnight.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
- Let us know which floor the room is on
Ask for a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say straight away whether it can be repaired.
Related advice
When to call us in Meikleour
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
The most common problems we’re called about are:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
What your quote should include
- How the room is protected while they work
- What aftercare is recommended
- What prep work is covered
- What happens if the damage is worse than the photos show
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
When a repair is not the answer
To be straight with you, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Shower trays
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
Nearby places to Meikleour
Also in Meikleour
Meikleour: your questions answered
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How do I get a price for non-slip bath coating in Meikleour?
Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your PH2 postcode.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Our work in Meikleour
Meikleour is about 4 miles south of Blairgowrie and Rattray, in Perth and Kinross. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover 107 places in Perth and Kinross. You can also see our page for Edinburgh, about 42 miles away.
Every address in PH2 is within our area. From Mercer Green, Old Military Road and Carsie Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Carsie (2 miles north-east), Burrelton (3 miles south-east), Woodside (3 miles south-east), Spittalfield (3 miles west) and Kinloch (3 miles north). We also work in nearby towns such as Perth (10 miles south), Blairgowrie and Rattray (4 miles north), Letham (10 miles south-west), Scone (8 miles south), Tulloch (10 miles south-west) and Alyth (8 miles north-east).
Around Meikleour
Locally, our jobs take us to homes close to Meikleour Hotel and Kinclaven Church and the streets around them. Nearby you will also find Kinclaven Castle (1.1 miles south) and Blairgowrie Community Hospital (3.3 miles north). Green spaces nearby include Fingask Loch.
Repair or replace in Meikleour?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Meikleour
- Work done at your home or business
- Honest advice, even when it means no job
- A fixed quote before you book
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list.
Landlord and trade work in Meikleour
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
