Cumbria · England

Non-slip bath & shower coating in Cleator, Cumbria

We travel to Cleator for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Cleator

How we handle non-slip bath coating in Cleator

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Common call-outs are for a bath or tray that is slippery when wet and worn-out textured areas, on resurfaced baths, enamelled baths and wet room floors (ask us).

Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Discoloured square shower tray restored with a new white finish
Location
Cleator (CA23)
Region
Cumbria
Cover
One year on every repair
Quote
Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026

Prices and what affects them

You will not pay by the hour. The price is based on:

  • What kind of damage it is
  • How much damage there is
  • Previous DIY repairs that have to come out
  • The colour and finish to match

A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

Send photos for a quote

Good pictures mean an accurate price. Here’s what we find most useful:

  • A coin beside the damage so we can judge size
  • A photo taken from further back
  • Your postcode, so we can check dates
  • Any earlier repairs or coatings

Email us pictures of the damage and one of the entire item, with your CA23 postcode, and we’ll reply with a fixed quote.

FAQs for Cleator

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

Can you redo someone else’s repair?

Most of the time. Let us know what was used before.

Can you quote from photos?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

Do the materials smell?

Some materials have a smell while they’re applied. It clears as the materials cure.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

How do I get a price for non-slip bath coating in Cleator?

Because every job differs, we price from photos. You’ll get a fixed figure before booking.

Do you work in Cleator?

Yes. We cover the whole UK and come to Cleator and the rest of Cumbria. Send us pictures for a fixed quote, or call 0345 017 0787.

Should you replace it?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Cleator

  • CHAS, Constructionline and SafeContractor accredited
  • Dust sheets down, tidy finish
  • We will tell you if it’s not worth repairing
  • A fixed quote before booking

See our full price list.

Common problems we fix in Cleator

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Customers generally contact us about:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet

Before you book anyone

  • What prep work is covered
  • Whether the price is fixed and includes VAT
  • How to care for the finish
  • What protection goes down before work starts

Our hiring checklist

Work for landlords and builders

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

How the visit works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and tell you when it’s ready to use.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Make sure the area is dry
  • Mention if the room is upstairs or in a flat

Get a quote

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Read more

Honest limits

In fairness, there are a few things a repair won’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly before booking.

What we work on

  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths

Covering Cleator

Cleator is about 3 miles south-east of Whitehaven, in Cumbria. From the centre of Cleator to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Cleator is one of 438 places in Cumbria we cover. We work right across the region, from Cleator to Liverpool (about 80 miles away).

We work across CA23. You will find streets such as Main Street, Cleator Gate and Prospect Row. Other places close to Cleator include Moor Row (1 mile north-west), Cleator Moor (1 mile north), Bigrigg (1 mile west), Galemire (2 miles north-west) and Keekle (2 miles north-west). Further out, we also cover Workington (9 miles north), Whitehaven (3 miles north-west), Maryport (14 miles north), Cockermouth (12 miles north-east), Moorclose (9 miles north) and Bransty (4 miles north-west).

What’s near Cleator

Our customers here include homes close to West Lakes Academy, Church of St Leonard and Montreal CofE Primary School. The nearest railway station is St Bees station, roughly 3 miles west of the centre. Well-known places in the area include Caernarvon Castle (3.9 miles south) and The Rum Story (3.9 miles north-west). Not far away are Clints Quarry.

Map of Cleator © OpenStreetMap contributors

DIY repairs versus a professional job

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.