Cornwall · England
Non-Slip Bath Coating for Crafthole homes
Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Crafthole. Send pictures for a free, fixed quote.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Repairing versus replacing in Crafthole
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Crafthole
- We will tell you if it’s not worth repairing
- Usually one visit, start to finish
- Free fixed quotes from pictures
- We leave the room as we found it
Take a look at our full price list.
Non-slip bath coating in Crafthole without replacing anything
It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Whether it’s a bath or tray that is slippery when wet and safety for older or less mobile people, we can help, whatever the material.
A one-year guarantee comes as standard, so you are not left on your own once we have gone. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Crafthole (PL11)
- County
- Cornwall
- Warranty
- A year, on every repair
- Quote
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
We would rather lose a job than do one that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Shower trays
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Wet room floors (ask us)
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. It normally takes a few hours, and we will keep you posted as we go.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
Ask for a price
Upload a picture of the damage and one of the entire item, and tell us you are in Crafthole, and we’ll come back with a fixed quote.
Read more
When to call us in Crafthole
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Most people get in touch when they notice one of these:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
What your quote should include
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- When it can be used again
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Where we work around Crafthole
Crafthole is about 4 miles south-west of Saltash, in Cornwall. Jobs in Crafthole are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We work in all 644 towns and villages across Cornwall.
Jobs in PL11 are booked in the same way as anywhere else. Local streets include West Lane, Carew Close and Sheviock Lane. We also travel to Sheviock (1 mile north-east), Antony (2 miles east), Freathy (2 miles south-east), St John (3 miles east) and Maryfield (4 miles east). Within a short drive, we also cover Stonehouse (6 miles east), Saltash (4 miles north-east), Liskeard (9 miles north-west), Addington (9 miles north-west), Looe (7 miles west) and Torpoint (4 miles east).
Around Crafthole
Our clients here include homes close to Church of St Mary, among other places. The closest station to Crafthole is St Germans station, about 2 miles north of the centre. Nearby you’ll also find Trematon Castle (3.6 miles north-east) and Plymouth General Hospital (5.1 miles east).
More services for Crafthole
Questions from Crafthole
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
How much does non-slip bath coating cost in Crafthole?
We give a fixed price from your photos. Send a close-up and a photo of the entire item with your PL11 postcode.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we will ask for another angle.
How we price non-slip bath coating
We give every job a fixed price from pictures. This is what makes a difference:
- Unusual colours or finishes
- How easy the damage is to reach
- Doing more than one item at once
- Any earlier repairs that need removing first
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
How to get a fixed quote
Phone pictures are fine, there is no need for anything special. Just make sure we can see:
- A wider photo showing the entire bath or shower tray
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- Natural light rather than flash
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
