Lancashire · England
Non-Slip Bath Coating for Fairhaven homes
Fixed-price non-slip bath coating in Fairhaven and the surrounding area, usually in one visit.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
Where we work around Fairhaven
Fairhaven is about 1 mile south of Lytham St Anne's, in Lancashire. Across the FY8 area, we carry out the work at your property. Fairhaven is one of 482 towns and villages in Lancashire where we work. Our nearest city page is Liverpool, about 23 miles away.
We work across FY8 and the streets around it. That includes homes on Myra Road, Lake Road and Derby Road. You’ll find Fairhaven on the A584, which makes it straightforward to reach. If you’re just outside Fairhaven, we cover Lytham St Anne's (1 mile north), St Annes (2 miles north-west), Squires Gate (3 miles north), Starr Gate (3 miles north-west) and Marton (4 miles north). Within a short drive, we also cover Preston (13 miles east), Bamber Bridge (14 miles east), Leyland (13 miles east), Fulwood (12 miles east), Fleetwood (12 miles north) and Ormskirk (13 miles south).
What’s near Fairhaven
Locally, our jobs take us to homes close to Ansdell Primary School, Arnold KEQMS and King Edward VII and Queen Mary School, among other places. Also close by are St Paul (less than half a mile north-east), Lowther Gardens (1.2 miles east) and The Blossoms pub (0.5 miles north-east). Fairhaven has its own railway station: Ansdell & Fairhaven station. Nearby you’ll also find Lytham Windmill Heritage Museum (1.7 miles east) and Clifton Hospital (within half a mile north-west). The countryside around Fairhaven includes Marton Mere and Marshside RSPB reserve.
Non-slip bath coating in Fairhaven without replacing anything
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. If you are dealing with worn-out textured areas and a bath or tray that is slippery when wet, we can help.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Area
- Fairhaven (FY8)
- Area hub
- Lancashire
- Warranty
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Fairhaven
Also in Fairhaven
What we are called out for in Fairhaven
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Contact us if you’ve noticed:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Worn-out textured areas
What your quote should include
- Whether there are any call-out or travel charges
- A fixed quote, and whether VAT is included
- How the room is protected while they work
- Whether the colour is mixed to match
FAQs for Fairhaven
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
How do I get a price for non-slip bath coating in Fairhaven?
Because every job differs, we price from pictures. You will get a fixed figure before booking.
Is there any odour?
Expect a mild smell while we’re working, which fades afterwards.
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why Fairhaven customers choose us
- No need to remove anything
- CHAS and Constructionline accredited
- One-year guarantee on every repair
- We leave the room as we found it
See our full price list.
How we price non-slip bath coating
There is no charge for travel to Fairhaven. The price depends on:
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- How hard the colour is to match
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Quotes from your pictures
Two or three clear photos are normally enough. It helps if you send:
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- A picture taken from further back
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
When a repair isn’t the answer
We will not take on work that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
- Enamelled baths
- Resurfaced baths
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a few hours. We clean up when we’re done and let you know when you can use it again.
- We clean and degrease the standing area.
- Next we mask off the area.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
Getting a price
Send us pictures of the damage and a wider shot of the entire item, with your FY8 postcode, and we’ll reply with a fixed price.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
