Powys · Wales
Non-slip bath & shower coating in Felindre, Powys
Clear non-slip coatings for baths and shower trays at your home in Felindre, with a one-year guarantee on every repair.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
About our non-slip bath coating in Felindre
It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. Whether it’s safety for older or less mobile people and a bath or tray that is slippery when wet, we can typically put it right, whatever the material.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Felindre (LD3)
- Area hub
- Powys
- Guarantee
- One year on every repair
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Felindre
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
How do I get a price for non-slip bath coating in Felindre?
Every job gets a fixed price based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Will I see the coating?
Very little: the treated area looks slightly matt.
Prices and what affects them
Quotes are free and the price is fixed. What we take into account:
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Where the damage is and how we get to it
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Good pictures mean an accurate price. Here’s what helps:
- A wider photo showing the entire bath or shower tray
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Something in shot to show the size
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed price.
Repairing versus replacing in Felindre
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Work done at your home or business
- Most jobs done in one visit
- Straight answers about what a repair can do
- No need to remove anything
Read our pricing.
Nearby places to Felindre
Other services in Felindre
How the visit works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, normally overnight.
Preparing for the visit
- Make sure the area is dry
- Make sure the room can be ventilated
- Keep pets and children out of the room while we work
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Do you need non-slip bath coating in Felindre?
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Look out for these signs:
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
Comparing quotes
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
- How your room will be protected
- Who will actually do the work
Felindre and nearby
Felindre is about 15 miles north-west of Abergavenny, in Powys. Whether you are in the middle of Felindre or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover all 234 towns and villages in Powys, from the larger towns to small villages. Our jobs stretch from Felindre to Birmingham (63 miles away).
We cover every part of the LD3 postcode area. Streets in the area include Trem y Mynydd Du and Nant-y-Deri, and we cover them all. We also travel to Gwernyfed (1 mile east), Glasbury (2 miles north), Llanigon (3 miles north-east), Hay (4 miles north-east) and Y Gelli Gandryll (4 miles north-east). Further out, we also cover Brecon (10 miles south-west), Llanfair-ym-Muallt (13 miles north-west), Llanfaes (11 miles south-west), Crughywel (12 miles south), Talgarth (3 miles south-west) and Pendre (10 miles south-west).
Near you in Felindre
In Felindre, that means homes near The Three Horseshoes pub and Gwernyfed High School, among other places. Well-known places in the area include Bronllys Hospital (3.3 miles west) and Tre-goed a Felindre (within half a mile south-east). Green spaces nearby include The Allt and Glasbury oxbow.
Landlords, agents and businesses in Felindre
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
When a repair isn’t the answer
Some jobs aren’t right for a repair, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Shower trays
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
