Perth and Kinross · Scotland
Non-slip bath & shower coating in Glencarse, Perth and Kinross
Our repair technicians come to Glencarse for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
Repair or replace: which is better?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why us?
- Straight answers about what a repair can do
- No need to remove anything
- Most jobs done in one visit
- Every repair guaranteed for a year
Take a look at our full price list.
About our non-slip bath coating in Glencarse
It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. Common call-outs are for safety for older or less mobile people and worn-out textured areas, in shower trays, enamelled baths and wet room floors (ask us).
All of our repairs are guaranteed for twelve months in Glencarse and everywhere else. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Where
- Glencarse (PH2)
- County
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Quotes
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Also in Glencarse
Common questions in Glencarse
Is a repair better than a new one?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we’ll plan for it.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Do you cover Glencarse?
Yes, we do. We send a technician to Glencarse for every job, with no extra charge for travel.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Glencarse and the surrounding area
Glencarse is about 6 miles east of Perth, in Perth and Kinross. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Glencarse is one of 107 places in Perth and Kinross we cover. Our jobs stretch from Glencarse to Edinburgh (about 30 miles away).
Every address in PH2 is within our area. You’ll find streets such as Madoch Road, Pitfour and Gowrie Way, and we cover them all. We also cover the places around Glencarse: St Madoes (1 mile south), Kinfauns (2 miles west), Newburgh (3 miles south-east), Abernethy (3 miles south) and Errol (4 miles east). We also work in nearby towns such as Perth (6 miles west), Blairgowrie and Rattray (15 miles north), Kinross (13 miles south), Letham (7 miles west), Scone (5 miles north-west) and Tulloch (7 miles west).
Landmarks near Glencarse
Locally, our jobs take us to homes close to All Saints Church and the streets around them. Nearby you will also find Bridge of Earn Hospital (4.1 miles south-west) and Pitfour Castle (0.5 miles south-east). Open spaces near Glencarse include Pitcairlie Hill.
When to call us in Glencarse
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Typical reasons for a call-out include:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Comparing quotes
- What aftercare is recommended
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- What happens if the damage is worse than the photos show
What a repair can’t fix
A repair is not right for every job, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Enamelled baths
- Resurfaced baths
- Acrylic baths
- Shower trays
- Wet room floors (ask us)
The process
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. It typically takes a few hours, and you can get on with other things while we’re there.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, normally overnight.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
Ask for a price
For a price in Glencarse, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
How we price non-slip bath coating
There is no charge for travel to Glencarse. The price depends on:
- How easy the damage is to reach
- The colour and finish to match
- Whether we combine several jobs
- The material and finish
Our prices are the same across the UK, with no extra for Glencarse. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- A wider photo showing the whole bath or shower tray
- Details of any past repairs
- Natural light rather than flash
- One sharp close-up of the damage
Most clients in Glencarse get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
