Perth and Kinross · Scotland

Non-slip bath & shower coating in Kinfauns, Perth and Kinross

Fixed-price non-slip bath coating in Kinfauns and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Kinfauns

Should you replace it?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. We charge the same wherever you are, with no extra for Kinfauns. What changes the price is the job itself: the material, the amount of damage and how many items.

Why choose Surface Doctor in Kinfauns

  • Fixed prices from your pictures
  • No need to remove anything
  • Work done at your home or business
  • A year’s guarantee on all work

Read our pricing.

About our non-slip bath coating in Kinfauns

It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. If you’re dealing with bath mats that harbour mould or get forgotten and worn-out textured areas, we can help, on resurfaced baths, wet room floors (ask us) and shower trays alike.

The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Stained shower tray resurfaced to clean white, before and after
Where
Kinfauns (PH2)
Region
Perth and Kinross
Guarantee
12 months on all our work
Quotes
Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Covering Kinfauns

Kinfauns is about 4 miles east of Perth, in Perth and Kinross. Our repair technicians come to homes and businesses in Kinfauns and the surrounding area, so you don’t need to take anything anywhere. Kinfauns is one of 107 places in Perth and Kinross where we work. Our nearest city page is Edinburgh, about 31 miles away.

Our repair technicians cover all of the PH2 postcode area and the streets around it. Close by, we cover Glencarse (2 miles east), St Madoes (2 miles south-east), Tarsappie (3 miles west), Scoonieburn (3 miles west) and Scone (3 miles north-west). We also work in nearby towns such as Perth (4 miles west), Blairgowrie and Rattray (14 miles north), Auchterarder (15 miles south-west), Kinross (12 miles south), Letham (5 miles west) and Tulloch (5 miles north-west).

Landmarks near Kinfauns

Typical jobs here are in homes near Kinfauns and the streets around them. Kinfauns’s nearest station is Perth station, roughly 3.4 miles west. A little further out are Perth Museum (3.1 miles west) and Kinfauns Castle (1.1 miles west). Not far away are Kinnoull Hill.

Map of Kinfauns © OpenStreetMap contributors

What a repair can’t fix

Some jobs are not right for a repair, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly.

What we work on

  • Wet room floors (ask us)
  • Shower trays
  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths

What non-slip bath coating costs

You will know the full cost before booking. We take into account:

  • Any earlier repairs that need removing first
  • How easy the damage is to reach
  • Whether we combine several jobs
  • The size and number of damaged areas

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from pictures

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • Daylight if possible, and no flash reflection
  • A coin or ruler next to the damage for scale
  • A wider photo showing the entire bath or shower tray
  • The material, if you know it

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.

What we do, step by step

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow a morning or an afternoon. Before we go, we will explain when it can be used and how to look after it.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, generally overnight.

How to prepare

  • Clear the area around the damage
  • Tell us about any previous repairs or coatings
  • Let us know about parking or access

How to get a price

The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a free quote

Read more

When to call us in Kinfauns

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Customers typically contact us about:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

Comparing quotes

  • How changes to the job are handled
  • Whether a trained technician does the job
  • How long the guarantee is and what it covers
  • How soon you can use it again

10 questions to ask before booking

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Work for landlords and builders

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

We are used to working with agents and managing companies. Send the address, photos and access details.

Kinfauns: your questions answered

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before and we will plan for it.

Do you charge for travel?

There’s no separate call-out charge. Your fixed quote includes everything.

Is there a guarantee?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

What happens if you find more damage?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

Will there be a smell?

Expect a mild smell while we’re working.

I rent my home. Can I book you?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.