Lancashire · England

Non-Slip Bath Coating in Jack Green

Clear non-slip coatings for baths and shower trays for homes and businesses in Jack Green and across Lancashire. Send photos for a free, fixed quote.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Jack Green

Non-slip bath coating in Jack Green, done in place

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Whether it’s safety for older or less mobile people and worn-out textured areas, we can typically put it right, on resurfaced baths, shower trays and acrylic baths alike.

All our work is covered by a one-year guarantee, wherever you are in Lancashire. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Location
Jack Green (PR6)
Region
Lancashire
Cover
A year, on every repair
Quote
Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.

Why choose Surface Doctor in Jack Green

  • Rooms protected and left tidy
  • CHAS, Constructionline and SafeContractor accredited
  • Nothing taken out or refitted
  • A fixed quote before booking

Take a look at our prices page.

When a repair isn’t the answer

We won’t take on work that will not last, so here’s what a repair can’t put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Shower trays
  • Resurfaced baths

Jack Green and the surrounding area

Jack Green is about 2 miles east of Bamber Bridge, in Lancashire. Our repair technicians come to customers in Jack Green and nearby villages, so there is no workshop to go to. Jack Green is one of 482 towns and villages in Lancashire we cover. Our jobs stretch from Jack Green to Manchester (about 23 miles away).

Our visits in PR6 are booked in the same way as anywhere else. Local streets include Hill House Lane and Oram Road, all of which we cover. If you are just outside Jack Green, we cover Gregson Lane (1 mile north-west), Brindle (1 mile south), Pippin Street (1 mile south-west), Coupe Green (1 mile north-west) and Thorpe Green (1 mile south-west). Larger places within reach include Preston (5 miles north-west), Burnley (15 miles east), Chorley (5 miles south), Accrington (10 miles east), Leyland (4 miles south-west) and Fulwood (6 miles north-west).

Around Jack Green

Around Jack Green, we work in homes near Roman Catholic Church of St Joseph, St Joseph's Catholic Primary School and Walton-le-Dale High School and the streets around them. Jack Green’s nearest station is Bamber Bridge station, roughly 2.2 miles west. Nearby you’ll also find South Ribble Museum (1.1 miles north-west) and Chorley and South Ribble District General Hospital (4.4 miles south). Open spaces near Jack Green include Brockholes and Healey Nab.

Map of Jack Green © OpenStreetMap contributors

Can I fix it myself?

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

How it works

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a morning or an afternoon. Before leaving, we tell you when it can be used and how to care for it.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Let us know if it has been repaired before
  • Avoid using the area for a few hours before we arrive

How to get a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a fixed price

Advice

Prices and what affects them

There are no hourly rates or hidden extras. The price is based on:

  • Where the damage is and how we get to it
  • What kind of damage it is
  • The colour and finish to match
  • How many areas need work

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Quotes from your photos

Phone pictures are fine. Just ensure we can see:

  • What it’s made of, if you know
  • Something in shot to show the size
  • A clear, close picture of the problem area
  • Good light, ideally daylight, without flash glare

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Common problems we fix in Jack Green

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

You may need us if you’ve spotted:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

What your quote should include

  • What aftercare is recommended
  • What prep work is covered
  • How long it needs to cure
  • Who will actually do the work

10 questions to ask before booking

Landlord and trade work in Jack Green

For anyone letting property in or around Jack Green, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Jack Green: your questions answered

How soon can you come?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Can I add another job to the visit?

Of course, and it generally saves money. Just add the extra items to your photos and you’ll get one combined price.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

What do you need from me?

Photos of the damage, a photo of the entire bath or shower tray and your postcode. After that, we just agree a date.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

Will there be a smell?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.