Gloucestershire · England
Non-slip bath & shower coating in Mile End, Gloucestershire
We travel to Mile End for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Worn-out textured areas
What non-slip bath coating costs
There’s no charge for travel to Mile End. The price comes down to:
- The colour and finish to match
- How many items we do on one visit
- How much damage there is
- Where the damage is and how we get to it
A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
Send pictures for a quote
It only takes a minute to photograph the damage. Try to send:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- A picture taken from further back
- Any details about the material
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Non-slip bath coating at your home in Mile End
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. We regularly repair acrylic baths, enamelled baths and shower trays, and common reasons people get in touch are worn-out textured areas and resurfaced baths that are now too smooth.
Your repair is guaranteed for a year, as with every job we do. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Mile End (GL16)
- Area hub
- Gloucestershire
- Cover
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
In fairness, there are a few things a repair won’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Resurfaced baths
- Enamelled baths
- Shower trays
- Wet room floors (ask us)
- Acrylic baths
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
The process
We work cleanly and quietly. We protect the area first, then the job itself takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, typically overnight.
Preparing for the visit
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
How to get a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Landlords, agents and businesses in Mile End
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Where we work around Mile End
Mile End is about 8 miles south of Ross-on-Wye, in Gloucestershire. We visit homes and businesses in Mile End and the surrounding area, so there is no workshop to go to. Mile End is one of 470 towns and villages in Gloucestershire where we work. Our jobs stretch from Mile End to Birmingham (about 55 miles away).
All of GL16 is covered, from the main roads to the quietest streets. You’ll find streets such as Owls Eye Close, Wood Road and Cedar Way, and we cover them all. With the B4028 and B4432 close by, Mile End is simple for us to get to. We also travel to Edge End (1 mile north), Lydbrook (3 miles north), Joys Green (3 miles north), Brierley (3 miles north-east) and The Pludds (3 miles north-east). Further out, we also cover Quedgeley (14 miles east), Lydney (6 miles south-east), Kingsway Village (14 miles east), Cam (12 miles south-east), Stonehouse (14 miles east) and Dursley (14 miles south-east).
What’s near Mile End
We visit homes around Gamekeepers Inn, Berry Hill Primary School and Spion Kop Quarry and the streets around them. You’ll also find The Church of the Good Shepherd (under half a mile south), Five Acres High School (0.6 miles north-west) and Royal Forest of Dean College (0.6 miles north-west). Nearby you will also find Cinderbury Iron Age Experience (2.4 miles south) and Dilke Memorial Hospital (3.4 miles east). Open spaces near Mile End include Foxes Bridge Bog and Huntsham Hill.
Your questions about non-slip bath coating in Mile End
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so let us know about it.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Are there extra charges for Mile End?
There is no separate call-out charge. The fixed price covers the visit and the work.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
When to call us in Mile End
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Signs it’s time to call us include:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
Questions to ask before you book
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
- How your room will be protected
- What happens if the damage is worse than the pictures show
Places near Mile End
What else we do in Mile End
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. We charge the same wherever you are, with no extra for Mile End. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- A fixed quote before you book
- We leave the room as we found it
- We’ll tell you if it’s not worth repairing
- Nothing taken out or refitted
Take a look at our full price list.
About our accreditations · Every repair comes with a one-year guarantee.
