Wiltshire · England

Non-Slip Bath Coating in Minety

We travel to Minety for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Minety

Our work in Minety

Minety is about 7 miles south of Cirencester, in Wiltshire. Anywhere in SN16, we carry out the work at your property. Minety is one of 425 towns and villages in Wiltshire we cover. You can also see our page for Birmingham, about 59 miles away.

We work across SN16. From Station Road, Silver Street and Oakleaze or anywhere nearby, we can come to you. Nearby, we also work in Lower Moor (1 mile north-west), Minety Common (1 mile south-east), Brandier (1 mile north-west), Upper Minety (1 mile west) and Leigh (2 miles north-east). Within a short drive, we also cover Chippenham (13 miles south-west), Calne (12 miles south), Malmesbury (6 miles west), Hardenhuish (13 miles south-west), Lyneham (7 miles south) and Pewsham (13 miles south-west).

Local landmarks in Minety

Around Minety, we work in homes near Church of St Leonard and Minety Church of England Primary School, among other places. Well-known places in the area include Ashton Keynes Castle (2.7 miles north-east). Not far away are Clattinger Farm.

Map of Minety © OpenStreetMap contributors

Non-slip bath coating in Minety, done in place

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Typical jobs include resurfaced baths that are now too smooth and worn-out textured areas, in enamelled baths, wet room floors (ask us) and resurfaced baths.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Where
Minety (SN16)
Region
Wiltshire
Warranty
A year, on every repair
Quote
Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026

Repairing versus replacing in Minety

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Minety

  • A year’s guarantee on all work
  • One visit for most repairs
  • No need to remove anything
  • Repair technicians who travel to you, UK-wide

See our full price list.

What we cannot put right

We will always be straight with you, so here’s what a repair can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before you book.

Materials we work on in Minety

  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths
  • Shower trays
  • Wet room floors (ask us)

DIY repairs versus a professional job

If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

How we price non-slip bath coating

There is no area surcharge for Minety. The price reflects:

  • Whether old repairs or coatings need taking off
  • Access to the area
  • The material and finish
  • The size and number of damaged areas

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Send pictures for a quote

Two or three clear pictures are normally enough. Try to include:

  • Good light, ideally daylight, without flash glare
  • Something in shot to show the size
  • A photo taken from further back
  • Any details about the material

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

FAQs for Minety

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.

Are there extra charges for Minety?

Travel is included in the price, and we charge the same wherever you are.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

Is my repair covered?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

It’s been repaired before. Can you still fix it?

Most of the time. Let us know what was used before and we will plan for it.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.

Do you come to Minety?

Yes, we do. We send a technician to Minety for every job, and the price is the same as everywhere else.

Do you do work for letting agents?

Yes, often. We can quote for several properties together and work between tenancies.

How the visit works

We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. You can expect it to take a few hours.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Let us know about parking or access
  • Clear toiletries, mats and anything else from around the area
  • Mention any earlier repairs or resurfacing

Getting a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a fixed price

Advice

Do you need non-slip bath coating in Minety?

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

The things clients typically mention when they call are:

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

What your quote should include

  • Aftercare advice
  • Whether the colour is mixed to match
  • Who turns up on the day
  • What preparation is included

10 questions to ask before you book

Landlord and trade work in Minety

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Landlords, letting agents and housing providers in Minety use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.