Cumbria · England

Non-Slip Bath Coating in Moresby Parks

Our technicians come to Moresby Parks for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Moresby Parks

Signs you need non-slip bath coating in Moresby Parks

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Clients typically contact us about:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

Questions to ask before you book

  • A fixed price, and whether VAT is included
  • How to look after the finish
  • How your room will be protected
  • Whether the colour is mixed to match

10 questions to ask before booking

How we handle non-slip bath coating in Moresby Parks

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Typical jobs include bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, on enamelled baths, acrylic baths and resurfaced baths.

Big or small, you get the same one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Area
Moresby Parks (CA28)
County
Cumbria
Warranty
A year, on every repair
Quote
Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

FAQs for Moresby Parks

Can pets and children be at home?

Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

When can you do it?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

Can I add another job to the visit?

Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Can you redo someone else’s repair?

Yes, we often do. It can add a little time, which we include in the quote.

What does non-slip bath coating cost?

Because every job differs, we price from photos. You know the full cost before anything is booked.

How it works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a few hours. If we find something your photos didn’t show, we will explain it before carrying on.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, usually overnight.

Preparing for the visit

  • Keep a parking space free if you can
  • Open a window if you can
  • Mention any parking restrictions or tricky access

How to get a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them to us. You will get a fixed price, not an estimate.

Send pictures for a quote

Related advice

Prices and what affects them

We do not charge extra for travel to Moresby Parks. The price comes down to:

  • How easy the damage is to reach
  • The material
  • What kind of damage it is
  • How many items we do on one visit

Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

How to get a fixed price

We price nearly every job from photos. This is what we need:

  • Whether it’s been repaired or coated before
  • Natural light rather than flash
  • A coin or ruler next to the damage for scale
  • A close-up of the damage, in focus

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Our work in Moresby Parks

Moresby Parks is about 2 miles north-east of Whitehaven, in Cumbria. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. We work in all 438 towns and villages in Cumbria, from the larger towns to small villages.

Jobs in CA28 work the same way as everywhere else we cover. We regularly work on streets such as Falcon Place, Merlin Drive and Parkfields Road. Other places close to Moresby Parks include Quality Corner (1 mile west), Low Moresby (1 mile north), Parton (1 mile north-west), Bransty (2 miles south-west) and Lowca (2 miles north-west). We also work in nearby towns such as Workington (5 miles north), Maryport (11 miles north), Cockermouth (10 miles north-east), Moorclose (5 miles north), Cleator Moor (3 miles south-east) and Egremont (5 miles south).

What’s near Moresby Parks

Locally, our jobs take us to homes close to St Mark's Church, Moresby Primary School and St Benedict's Catholic High School and the streets around them. The nearest railway station is Parton station, roughly 1.3 miles north-west of the centre. Well-known places in the area include The Rum Story (1.6 miles south-west) and West Cumberland Hospital (2.1 miles south). Not far away are Clints Quarry.

Map of Moresby Parks © OpenStreetMap contributors

What a repair can’t fix

Before you book, it’s worth knowing the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly.

What we work on

  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Shower trays
  • Resurfaced baths

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

Repair or replace in Moresby Parks?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why Moresby Parks clients choose us

  • Repair technicians who travel to you, UK-wide
  • Straight answers about what a repair can do
  • Same prices wherever you are
  • One visit for most repairs

Take a look at our full price list.

Landlord and trade work in Moresby Parks

We work for landlords, letting agents and housing providers in Moresby Parks as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.