Wiltshire · England

Non-slip bath & shower coating in Nomansland, Wiltshire

Non-slip bath coating in and around Nomansland: photo quotes, tidy work and a year’s guarantee.

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Nomansland

Should you replace it?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.

Why us?

  • Dust sheets down, tidy finish
  • Honest advice, even when it means no job
  • CHAS and Constructionline accredited
  • One-year guarantee on every repair

Read our full price list.

Non-slip bath coating at your home in Nomansland

It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Typical jobs include safety for older or less mobile people and resurfaced baths that are now too smooth, on wet room floors (ask us), acrylic baths and shower trays.

All our work is covered by a one-year guarantee, wherever you are in Wiltshire. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Where
Nomansland (SP5)
Region
Wiltshire
Warranty
12 months on all our work
Price
Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Nomansland: your questions answered

Can you redo someone else’s repair?

Most of the time. Let us know what was used before and we’ll plan for it.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

What happens once I’ve sent photos?

We come back with a fixed price, typically with dates to choose from. You’re under no obligation.

Are there extra charges for Nomansland?

No. Our quotes include travel, and we charge the same wherever you are.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Is there a guarantee?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

What we cannot put right

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

Materials we work on in Nomansland

  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths
  • Acrylic baths
  • Resurfaced baths

Prices and what affects them

Quotes are free and the price is fixed. What we take into account:

  • Whether old repairs or coatings need taking off
  • How many areas need work
  • The material
  • The type of damage

Our prices are the same across the UK, so there’s no premium for Nomansland. The job itself decides the price: the material, the amount of damage and how many items.

Send photos for a quote

Phone photos are fine, there’s no need for anything special. Make sure they show:

  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • The postcode, so we can plan the visit
  • What it’s made of, if you know

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

What we do, step by step

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which generally takes a few hours. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, normally overnight.

Preparing for the visit

  • Keep children and pets away from the room on the day
  • Ensure the area is dry
  • Clear the area around the damage

Get a quote

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed price

Advice

Nomansland and nearby

Nomansland is about 6 miles north-west of Totton, in Wiltshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Nomansland is one of 425 places in Wiltshire where we work. We work right across the region, from Nomansland to London (77 miles away).

Our repair technicians cover all of SP5. We regularly work on streets such as York Drove, Forest Road and Pear Tree Drive. Neighbouring places we cover include Landford (1 mile north), Bramshaw (1 mile south-east), Hamptworth (2 miles north-west), Plaitford (2 miles north-east) and Canada (2 miles east). Larger places within reach include Salisbury (11 miles north-west), Bugmore (10 miles north-west), Milford (10 miles north-west), Old Sarum (12 miles north-west), Harnham (10 miles north-west) and Bemerton (11 miles north-west).

Near you in Nomansland

In Nomansland, that means homes near The Lamb Inn, The New Forest CofE (VA) Primary School and Church of St Peter. Nearby you will also find Tatchbury Mount Hospital (5.1 miles east). For a walk, there’s Copythorne Common.

Map of Nomansland © OpenStreetMap contributors

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Landlord and trade work in Nomansland

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Do you need non-slip bath coating in Nomansland?

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Common reasons people in Nomansland contact us are:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

What your quote should include

  • What happens if they find more damage
  • Aftercare advice
  • If travel is included in the price
  • Is the price fixed, and does it include VAT?

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.