Wiltshire · England
Non-Slip Bath Coating in Bemerton
Non-slip bath coating in Bemerton without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Worn-out textured areas
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
About our non-slip bath coating in Bemerton
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Typical jobs include safety for older or less mobile people and bath mats that harbour mould or get forgotten, on shower trays, enamelled baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Area
- Bemerton (SP2, SP5, SP1)
- County
- Wiltshire
- Guarantee
- 12 months on all our work
- Quotes
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Towns and villages near Bemerton
More services for Bemerton
What a repair can’t fix
Before booking, it’s worth knowing the limits too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
- Shower trays
How we price non-slip bath coating
We do not charge extra for travel to Bemerton. The price comes down to:
- The colour and finish to match
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- Where you are, by postcode
- A coin beside the damage so we can judge size
Email us a photo of the damage and one of the whole item, and tell us you’re in Bemerton, and we’ll reply with a fixed quote.
Work for landlords and builders
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Your questions about non-slip bath coating in Bemerton
What areas do you cover?
The entire UK, including all of Wiltshire. Just include your postcode and we will offer you dates.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
How much does non-slip bath coating cost in Bemerton?
Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens after I send photos?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Our work in Bemerton
Bemerton is about 1 mile west of Salisbury, in Wiltshire. Clients in Bemerton get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Bemerton is one of 425 places in Wiltshire where we work. Our nearest city page is London, about 80 miles away.
Jobs in SP2, SP5 and SP1 are booked in the same way as anywhere else. Jobs here include addresses on Gas Lane, Watt Road and York Road and the roads around them. We also cover the places around Bemerton: Stratford sub Castle (1 mile north-east), Netherhampton (1 mile south-west), Quidhampton (1 mile west), Fugglestone St Peter (2 miles west) and Wilton (2 miles west). Further out, we also cover Amesbury (7 miles north), Old Sarum (3 miles north-east), Bulford (9 miles north), Tisbury (12 miles west), Durrington (9 miles north) and Downton (6 miles south-east).
Near you in Bemerton
We visit homes around Chafyn Grove School, Church of St Andrew and Salisbury. Nearby too are Horse & Groom pub (less than half a mile east), South Wiltshire UTC (under half a mile north-east) and Corn Exchange (0.9 miles east). Bemerton has its own railway station: Salisbury station. Well-known places in the area include Salisbury (0.9 miles south-east) and Old Sarum Castle (1.4 miles north). Open spaces near Bemerton include Harnham Hill.
How the visit works
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. Most visits take a few hours, tidy-up included.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, normally overnight.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
- Make sure the room can be ventilated
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed quote the same day in most cases.
Related advice
When to call us in Bemerton
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
These are the problems we’re asked about most:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- What prep work is covered
- What happens if they find more damage
- What the guarantee covers, and for how long
Repair or replace in Bemerton?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- No extra charge for your area
- Most jobs done in one visit
- Rooms protected and left tidy
- Everything repaired in place
Read our full price list.
About our accreditations · Every repair comes with a one-year guarantee.
