Wiltshire · England

Non-Slip Bath Coating for Pentridge homes

We travel to Pentridge for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Pentridge?

Non-slip bath coating in Pentridge, done in place

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Typical jobs include worn-out textured areas and bath mats that harbour mould or get forgotten, on shower trays, enamelled baths and resurfaced baths.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Area
Pentridge (SP5)
Area hub
Wiltshire
Cover
A year, on every repair
Quote
Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Honest limits

We will always be straight with you, so here’s what a repair can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Acrylic baths
  • Resurfaced baths

Covering Pentridge

Pentridge is about 7 miles north-west of Verwood, in Wiltshire. Across the SP5 area, we come to you. Pentridge is one of 425 places in Wiltshire we cover.

Every address in SP5 is covered. Close by, we cover New Forest (2 miles north-east), Martin (2 miles north-east), Sixpenny Handley (2 miles west), Deanland (3 miles west) and Cranborne (3 miles south-east). Within a short drive, we also cover Salisbury (10 miles north-east), Bugmore (10 miles north-east), Milford (10 miles north-east), Old Sarum (12 miles north-east), Harnham (9 miles north-east) and Bemerton (10 miles north-east).

Around Pentridge

Around Pentridge, we work in homes near Church of St Rumbold, among other places. Nearby you’ll also find Cranborne Castle Hill (3.6 miles south-east). For a walk, there is Western Downs.

Map of Pentridge © OpenStreetMap contributors

Work for landlords and builders

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

We regularly work with letting and managing agents. Send the address, photos and access details.

What non-slip bath coating costs

Each job gets its own fixed price. These are the things that affect it:

  • How many items we do on one visit
  • Where the damage is and how we get to it
  • Any earlier repairs that need removing first
  • The size and number of damaged areas

Our prices are the same across the UK, so there’s no premium for Pentridge. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your pictures

Phone photos are fine. Just make sure we can see:

  • One sharp close-up of the damage
  • Whether it’s been repaired or coated before
  • One picture of the whole bath or shower tray
  • Daylight if possible, and no flash reflection

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

The process

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to look after it.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, normally overnight.

How to prepare

  • Let the surface dry out before the visit
  • Mention any parking restrictions or tricky access
  • Have somewhere for us to park nearby if possible

Ask for a price

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Related advice

Repair or replace in Pentridge?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why choose Surface Doctor in Pentridge

  • Fixed prices from your photos
  • Every repair guaranteed for a year
  • CHAS and Constructionline accredited
  • Same prices wherever you are

Take a look at our pricing.

Common problems we fix in Pentridge

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

The things customers usually mention when they call are:

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

Questions to ask before you book

  • When it can be used again
  • Whether the price is fixed and includes VAT
  • If travel is included in the price
  • How long the guarantee is and what it covers

Choosing a repair company

FAQs for Pentridge

What if the damage is worse than the pictures show?

We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before and we’ll plan for it.

What do you need from me?

Photos of the damage, a photo of the whole bath or shower tray and your postcode. Then we’ll agree a date.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Will I see the coating?

Very little: it shows as a matt area where you stand.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Do you cover the entire of Wiltshire?

The entire UK, including all of Wiltshire. Just include your postcode and we’ll offer you dates.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.