Lancashire · England

Non-Slip Bath Coating for Pincock homes

Clear non-slip coatings for baths and shower trays in Pincock, carried out at your home and guaranteed for a year.

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Pincock?

The process

We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, usually overnight.

Preparing for the visit

  • Keep children and pets away from the room on the day
  • Have somewhere for us to park nearby if possible
  • Let us know about parking or access

How to get a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed price the same day in most cases.

Get a free quote

Read more

Non-slip bath coating in Pincock without replacing anything

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Our repair technicians work on resurfaced baths, shower trays and enamelled baths, and common reasons people contact us are safety for older or less mobile people and resurfaced baths that are now too smooth.

Whatever the size of the job, you get the same one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Where
Pincock (PR7)
Area hub
Lancashire
Warranty
One year on every repair
Quotes
Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Do you need non-slip bath coating in Pincock?

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

The most common problems we’re called about are:

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten

Questions to ask before booking

  • What aftercare is recommended
  • How long it needs to cure
  • The length of the guarantee and what it covers
  • Whether the price covers travel

10 questions to ask before you book

Pincock and nearby

Pincock is about 2 miles west of Chorley, in Lancashire. Anywhere in PR7, we come to you. Pincock is one of 482 places in Lancashire we cover. Our jobs stretch from Pincock to Liverpool (20 miles away).

Jobs in PR7 are booked in the same way as anywhere else. We regularly work on streets such as Dunrobin Drive, Wigan Road and Dunnock Drive and the roads around them. Other places close to Pincock include Bolton Green (1 mile south-west), Euxton (1 mile north), Astley Village (1 mile east), Runshaw Moor (1 mile north-west) and Charnock Richard (2 miles south). Within a short drive, we also cover Preston (8 miles north), Lytham St Anne's (15 miles north-west), Bamber Bridge (5 miles north), Accrington (14 miles north-east), Leyland (3 miles north) and Fulwood (9 miles north).

Landmarks near Pincock

Our clients here include homes close to Balshaw Lane Community Primary School, Euxton Hall Chapel and Parklands High School and the streets around them. Pincock has its own railway station: Euxton Balshaw Lane station. Further afield, we also cover the area around British Commercial Vehicle Museum (2.7 miles north) and Chorley and South Ribble District General Hospital (1.7 miles east). Green spaces nearby include Healey Nab.

Map of Pincock © OpenStreetMap contributors

What a repair can’t fix

To be straight with you, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think.

Materials we repair

  • Resurfaced baths
  • Enamelled baths
  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths

How we price non-slip bath coating

Each job gets its own fixed price. These are the things that affect it:

  • Access to the area
  • What the surface is made of
  • How hard the colour is to match
  • The type of damage

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Send pictures for a quote

Almost every job we do is priced from pictures. This is what we need:

  • What it’s made of, if you know
  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Why book with us

  • We leave the room as we found it
  • Every repair guaranteed for a year
  • A fixed quote before booking
  • Most jobs done in one visit

Read our pricing.

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Common questions in Pincock

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Can you quote from pictures?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Is the work guaranteed?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

Will I see the coating?

Only slightly: the treated area looks slightly matt.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Work for landlords and builders

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Housing associations and facilities teams use us for planned and reactive repairs in Lancashire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.