Wiltshire · England
Non-slip bath & shower coating in Ridge, Wiltshire
We travel to Ridge for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Non-slip bath coating in Ridge, done in place
The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Our technicians work on shower trays, wet room floors (ask us) and enamelled baths, and people most often call us about safety for older or less mobile people and bath mats that harbour mould or get forgotten.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Ridge (SP3)
- Region
- Wiltshire
- Cover
- One year on every repair
- Quote
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
We charge the same across the UK, including Ridge. The price reflects:
- The colour and finish to match
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
Our prices are the same across the UK, so there’s no premium for Ridge. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your photos
You can take the photos on your phone. Just ensure we can see:
- What it’s made of, if you know
- A wider photo showing the entire bath or shower tray
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Where we work around Ridge
Ridge is about 10 miles south-east of Warminster, in Wiltshire. Jobs in Ridge are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Ridge is one of 425 towns and villages in Wiltshire where we work.
All of SP3 is within our area, from the main roads to the quietest streets. Other places close to Ridge include Chilmark (1 mile north-east), Upper Chicksgrove (1 mile south), Tisbury (2 miles south-west), Tuckingmill (2 miles south-west) and Teffont Magna (2 miles east). Within a short drive, we also cover Salisbury (12 miles east), Westbury (13 miles north-west), Warminster (10 miles north-west), Amesbury (14 miles north-east), Bugmore (12 miles east) and Milford (12 miles east).
Landmarks near Ridge
In Ridge, that means homes near Church of St Margaret of Antioch and the streets around them. For rail, the closest station is Tisbury station, about 1.8 miles south of the centre. A little further out are Old Wardour Castle (3.6 miles south). The countryside around Ridge includes Swallowcliffe Down and Fonthill Lake.
Do you need non-slip bath coating in Ridge?
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Keep an eye out for any of the following:
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Questions to ask before booking
- What prep work is covered
- Is the price fixed, and does it include VAT?
- How changes to the job are handled
- Whether there are any call-out or travel charges
What else we do in Ridge
Repair or replace: which is better?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Ridge customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- No need to remove anything
- We come to you, anywhere in the UK
Take a look at our pricing.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
What we cannot put right
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
Landlord and trade work in Ridge
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What we do, step by step
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. It usually takes a few hours, and you can get on with other things while we’re there.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, generally overnight.
Getting ready for the visit
- Let the surface dry out before the visit
- Open a window if you can
- Let us know which floor the room is on
Get a quote
For a price in Ridge, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Your questions about non-slip bath coating in Ridge
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
What happens after I send pictures?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What areas do you cover?
Everywhere in the UK, Ridge included. Travel is included in the price.
About our accreditations · Every repair comes with a one-year guarantee.
