Wiltshire · England
Bath re-enamelling & resurfacing in Ridge, Wiltshire
Damaged bath in Ridge? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
Bath re-enamelling in Ridge, done in place
If your bath is sound but looks tired, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Our repair technicians work on acrylic baths, pressed steel baths and Victorian roll-tops, and the jobs we see most are enamel that’s lost its shine and feels rough and an old resurfacing that’s failing.
All our work is covered by a one-year guarantee.
- Where
- Ridge (SP3)
- Area hub
- Wiltshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Ridge
Ridge is about 10 miles south-east of Warminster, in Wiltshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Ridge is one of 425 places in Wiltshire where we work.
Our technicians cover all of SP3 and the streets around it. Neighbouring places we cover include Chilmark (1 mile north-east), Upper Chicksgrove (1 mile south), Tisbury (2 miles south-west), Tuckingmill (2 miles south-west) and Teffont Magna (2 miles east). Larger places within reach include Salisbury (12 miles east), Westbury (13 miles north-west), Warminster (10 miles north-west), Amesbury (14 miles north-east), Bugmore (12 miles east) and Milford (12 miles east).
Local landmarks in Ridge
Our customers here include homes close to Church of St Margaret of Antioch, among other places. The nearest railway station is Tisbury station, roughly 1.8 miles south. Other landmarks nearby include Old Wardour Castle (3.6 miles south). Open spaces near Ridge include Swallowcliffe Down and Fonthill Lake.
Nearby places to Ridge
More services for Ridge
Looking after it afterwards
Once the work has cured, treat it gently:
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
- Do not use the bath until it has fully cured
- Repair dripping taps early
Dry the bath after use if possible, and rinse off any bath products.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Repair or replace in Ridge?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
- Free fixed quotes from pictures
Read our full price list and resurfacing vs replacement cost guide.
What affects the price in Ridge
Resurfacing from £350. You’ll know the full cost before you book. We look at:
- What kind of damage it is
- What the surface is made of
- The size and number of damaged areas
- Whether we combine several jobs
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Phone pictures are fine, there is no need for anything special. Just make sure we can see:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- The material, if you know it
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll say immediately if a repair is the right fix.
Do you need bath re-enamelling in Ridge?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Customers typically contact us about:
- A roll-top that is seen better days
- An old resurfacing that is failing
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
What your quote should include
- Who turns up on the day
- What protection goes down before work starts
- The length of the guarantee and what it covers
- If travel is included in the price
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair can’t fix:
- Holes rusted through the metal
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Your questions about bath re-enamelling in Ridge
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
How do I get a price for bath re-enamelling in Ridge?
Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
What areas do you cover?
Everywhere in the UK, Ridge included. Travel is included in the price.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What happens on the day
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for most of the day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
Getting a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
