Kent · England

Non-Slip Bath Coating for Ringwould homes

Non-slip bath coating for Ringwould, without a refit. Send us pictures for a fixed price, then we come to you.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Ringwould

Non-slip bath coating in Ringwould without replacing anything

It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Typical jobs include worn-out textured areas and a bath or tray that is slippery when wet, in resurfaced baths, enamelled baths and shower trays.

A one-year guarantee comes as standard. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Location
Ringwould (CT14)
Area hub
Kent
Cover
One year on every repair
Quote
Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Do you need non-slip bath coating in Ringwould?

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

You may need us if you’ve spotted any of these:

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

Comparing quotes

  • How long it needs to cure
  • How the colour is matched
  • Who will actually do the work
  • The length of the guarantee and what it covers

Choosing a repair company

What non-slip bath coating costs

There’s no charge for travel to Ringwould. The price depends on:

  • The material
  • How easy the damage is to reach
  • Unusual colours or finishes
  • Whether it’s a chip, crack, burn or wear

Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Send photos for a quote

When you take your photos, a few simple things make all the difference:

  • What it’s made of, if you know
  • A photo taken from further back
  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths
  • Shower trays

Ringwould questions

Do I have to be there?

We need someone to let us in. You do not need to watch us work.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.

Do you work in Ringwould?

We do. We send a technician to Ringwould for every job, with no extra charge for travel.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you do work for letting agents?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Which areas do you work in?

We cover the entire UK, including Ringwould and the rest of Kent. Just include your postcode and we’ll confirm dates.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Will there be a smell?

Expect a mild smell while we’re working.

About Ringwould

Ringwould is about 2 miles south of Deal, in Kent. Jobs in Ringwould are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Ringwould is one of 922 places in Kent where we work. You can also see our page for London, about 67 miles away.

Every address in CT14 is within our area, from the main roads to the quietest streets. From Back Street, Front Street and Queen's Rise or a nearby road, we can come to you. Being close to the A258, Ringwould is simple for us to get to. Other places close to Ringwould include Kingsdown (1 mile east), Martin (1 mile south-west), Martin Mill (1 mile south-west), Sutton (2 miles north-west) and East Langdon (2 miles south-west). We also work in nearby towns such as Canterbury (14 miles north-west), Margate (14 miles north), Dover (5 miles south-west), Folkestone (11 miles south-west), Ramsgate (11 miles north) and Broadstairs (13 miles north).

Local landmarks in Ringwould

Our customers here include homes close to Goodwin Academy, Five Bells pub and Kingsdown and Ringwould CofE Primary School. The closest station to Ringwould is Walmer station, about 1.3 miles north. A little further out are Walmer Castle (1.6 miles north-east) and St Margaret's Museum (2.6 miles south).

Map of Ringwould © OpenStreetMap contributors

What happens on the day

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Make sure the area is dry
  • Mention any earlier repairs or resurfacing

How to get a price

There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Get a fixed quote

Advice

Landlord and trade work in Ringwould

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • Normally one visit, start to finish
  • We’ll tell you if it’s not worth repairing
  • Nothing taken out or refitted
  • Every repair guaranteed for a year

Take a look at our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.