Isle of Wight · England
Non-slip bath & shower coating in Shide, Isle of Wight
Fixed-price non-slip bath coating in Shide and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Worn-out textured areas

About our non-slip bath coating in Shide
The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Our technicians work on resurfaced baths, acrylic baths and enamelled baths, and common reasons people get in touch are bath mats that harbour mould or get forgotten and worn-out textured areas.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

- Area
- Shide (PO30)
- County
- Isle of Wight
- Warranty
- A year, on every repair
- Price
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Repair or replace in Shide?
The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- No need to remove anything
- Rooms protected and left tidy
- A fixed quote before booking
- Honest advice, even when it means no job
Read our prices page.
Questions from Shide
Do you cover Shide?
We do. Technicians travel to Shide from across the region, and the price is the same as everywhere else.
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
How we price non-slip bath coating
We give every job a fixed price from photos. This is what makes a difference:
- Unusual colours or finishes
- How much damage there is
- Access to the area
- Whether old repairs or coatings need taking off
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Natural light rather than flash
- Details of any past repairs
- A close-up of the damage, in focus
- Where you are, by postcode
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.
Also in Shide
The process
You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It normally takes a morning or an afternoon, and you can get on with other things while we are there.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- We leave it to cure, usually overnight.
Before we arrive
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Shide and the surrounding area
Shide is about 1 mile south-east of Newport, in Isle of Wight. Jobs in Shide are booked in like any other job: a fixed quote from photos, then a visit to do the work. Shide is one of 125 towns and villages in Isle of Wight where we work. Our jobs stretch from Shide to London (76 miles away).
Our repair technicians cover all of the PO30 postcode area. Whether you live on Pan Lane, Ash Road and Dairy Lane or a nearby road, we can come to you. Shide sits on or near the A3020, so getting to you is simple. We also travel to Newport (1 mile north-west), Blackwater (1 mile south), Downend (2 miles east), Merstone (3 miles south-east) and Rookley (3 miles south). Within a short drive, we also cover Ryde (6 miles east), Cowes (5 miles north), Sandown (6 miles south-east), Shanklin (7 miles south-east), Ventnor (8 miles south-east) and East Cowes (4 miles north). For island and remote addresses, call first so we can plan the visit.
Around Shide
We visit homes around Nine Acres Primary School, Seaclose Park and Island Innovation VI Form Campus and the streets around them. Nearby too are Church of St. John the Baptist (within half a mile north-west), The Cranbourne Arms Public House (less than half a mile north-west) and Christ The King College (0.8 miles west). Nearby you will also find St Mary's Hospital (1.3 miles north) and Carisbrooke Castle (1 mile west). Not far away are Mill Hill and Briddlesford Nature Reserve.
When a repair is not the answer
Some jobs aren’t right for a repair, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Resurfaced baths
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
When to call us in Shide
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Most people get in touch after spotting one of these:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Comparing quotes
- How long it needs to cure
- Whether cleaning and preparation are in the price
- Whether a trained technician does the job
- How to care for the finish
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.

