Kent · England

Non-Slip Bath Coating for Stelling Minnis homes

Fixed-price non-slip bath coating in Stelling Minnis and the surrounding area, usually in one visit.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Stelling Minnis

Non-slip bath coating in Stelling Minnis, done in place

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Typical jobs include worn-out textured areas and a bath or tray that is slippery when wet, on resurfaced baths, acrylic baths and shower trays.

Your repair is guaranteed for a year, as with every job we do. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Discoloured square shower tray restored with a new white finish
Location
Stelling Minnis (CT4)
Region
Kent
Guarantee
A year, on every repair
Quotes
Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026

DIY kit or professional repair?

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

When we would advise against a repair

A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think.

Materials we work on in Stelling Minnis

  • Acrylic baths
  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)
  • Enamelled baths

How the visit works

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes a few hours, and we will keep you posted as we go.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Let us know which floor the room is on
  • Point us to the nearest place to park

Ask for a price

Most clients in Stelling Minnis get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a free quote

Advice

Should you replace it?

The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • Free fixed quotes from pictures
  • Work done at your home or business
  • One visit for most repairs
  • CHAS and Constructionline accredited

Read our pricing.

Your questions about non-slip bath coating in Stelling Minnis

What areas do you cover?

We cover the entire UK, including Stelling Minnis and the rest of Kent. Just include your postcode and we will confirm dates.

Will a non-slip coating change how my bath looks?

Only slightly: the treated area looks slightly matt.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Is a repair better than a new one?

Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum.

What happens after I send photos?

We review the pictures and send a fixed quote with dates.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Prices and what affects them

There are no hourly rates or hidden extras. The price is based on:

  • The colour and finish to match
  • Any earlier repairs that need removing first
  • What the surface is made of
  • Where the damage is and how we get to it

We charge the same wherever you are, so there is no premium for Stelling Minnis. What changes the price is the job itself: the material, the amount of damage and how many items.

How to get a fixed quote

The better the photos, the more accurate the price. Here’s what we find most useful:

  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale
  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings

The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.

What we are called out for in Stelling Minnis

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

People usually call us when they notice one of these:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas

What to look for in a quote

  • A fixed price, and whether VAT is included
  • When it can be used again
  • What protection goes down before work starts
  • Aftercare advice

Choosing a repair company

Stelling Minnis and the surrounding area

Stelling Minnis is about 6 miles south of Canterbury, in Kent. Our technicians come to homes and businesses in Stelling Minnis, so there’s no workshop to go to. Stelling Minnis is one of 922 places in Kent where we work. Our nearest city page is London, about 55 miles away.

Our repair technicians cover all of CT4 and the streets around it. That includes homes on Bossingham Road, Ponycart Lane and Minnis Lane and the roads around them. Neighbouring places we cover include Bossingham (1 mile north-east), Waltham (2 miles west), Rhodes Minnis (3 miles south), Stowting Common (3 miles south-west) and Ottinge (3 miles south). Larger places within reach include Ashford (9 miles west), Canterbury (6 miles north), Dover (11 miles east), Folkestone (8 miles south-east), Whitstable (12 miles north) and Deal (14 miles east).

Landmarks near Stelling Minnis

Our customers here include homes close to Church of St Mary, Spong Wood and Stelling Minnis Church of England Primary School and the streets around them. A little further out are Kent and Canterbury Hospital (5.6 miles north).

Map of Stelling Minnis © OpenStreetMap contributors

Landlord and trade work in Stelling Minnis

Landlords, letting agents and housing providers in Stelling Minnis use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

If you manage property in Stelling Minnis, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.