Isle of Anglesey · Wales

Non-slip bath & shower coating in Valley, Isle of Anglesey

Clear non-slip coatings for baths and shower trays at your home in Valley, with a one-year guarantee on every repair.

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Valley

Non-slip bath coating at your home in Valley

It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Our technicians work on wet room floors (ask us), resurfaced baths and enamelled baths, and the jobs we see most are worn-out textured areas and a bath or tray that is slippery when wet.

You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Area
Valley (LL65)
County
Isle of Anglesey
Guarantee
12 months on all our work
Price
Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026

When we’d advise against a repair

A repair isn’t always the answer, and we’ll tell you before we start. We can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Shower trays

Valley: your questions answered

Is it worth repairing rather than replacing?

Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.

What information do you need?

Photos of the damage, a photo of the entire bath or shower tray and your postcode. After that, we just agree a date.

Can you do more than one item on the same visit?

Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

What does non-slip bath coating cost?

We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your LL65 postcode.

Can you redo someone else’s repair?

Typically, yes. The old repair comes out first, so mention it when you send pictures.

Do I need to be at home?

Someone needs to let us in and show us the job. You do not need to watch us work.

Are there extra charges for Valley?

No. Our quotes include travel, with the same prices everywhere we work.

Our work in Valley

Valley (Welsh: Y Fali) is about 3 miles south-east of Holyhead, in Isle of Anglesey. Anywhere in LL65, a technician comes to you. We cover 115 places across Isle of Anglesey. You can also see our page for Liverpool, about 68 miles away.

Here we cover the LL65 postcode area. That includes homes on Station Road, Stanley Avenue and Manning Drive. Neighbouring places we cover include Four Mile Bridge (1 mile south-west), Caergeiliog (1 mile south-east), Llanfair-yn-Neubwll (2 miles south-east), Llanfihangel yn Nhowyn (2 miles south-east) and Penrhyn (2 miles south-east). Further out, we also cover Holyhead (3 miles north-west), Blackbridge (3 miles north-west), Porth-y-Felin (4 miles north-west), Llangefni (11 miles east), Stryd (3 miles north-west) and Pont-Hwfa (4 miles north-west).

Near you in Valley

Locally, our jobs take us to homes close to St Michael's Church, The Bull Hotel and Ysgol Gymuned Fali, among other places. Valley has its own railway station: Valley station. Further afield, we also cover the area around Caer Gybi (3.2 miles north-west) and Ysbyty Penrhos Stanley (2.4 miles north-west). For a walk, there’s Llyn Dinam and Hirfron.

Map of Valley © OpenStreetMap contributors

The process

We agree an arrival time beforehand, so you know when to expect us. On site, it takes a morning or an afternoon. We leave the room clean and you will know when it can be used.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Ensure the room can be ventilated
  • Move bottles, mats and clutter away from the area

Get a quote

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Get a fixed quote

Advice

Common problems we fix in Valley

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

It’s worth getting a quote if you see:

  • Safety for older or less mobile people
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

Questions to ask before you book

  • What protection goes down before work starts
  • Whether cleaning and preparation are in the price
  • How the colour is matched
  • What happens if the damage is worse than the photos show

10 questions to ask before you book

Work for landlords and builders

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

What affects the price in Valley

We price every job individually. The main factors are:

  • The size and number of damaged areas
  • Access to the area
  • The colour and finish to match
  • How many items we do on one visit

We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send photos for a quote

Phone photos are fine, there is no need for anything special. Make sure they show:

  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection
  • One sharp close-up of the damage
  • Something in shot to show the size

To get a price, send two or three photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

Should you replace it?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.

Why book with us

  • Repair technicians who travel to you, UK-wide
  • A fixed quote before booking
  • No need to remove anything
  • We will tell you if it’s not worth repairing

See our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.