Pembrokeshire · Wales

Non-Slip Bath Coating for Wooden homes

We travel to Wooden for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Wooden?

How we handle non-slip bath coating in Wooden

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. If you’re dealing with worn-out textured areas and safety for older or less mobile people, we can help, on enamelled baths, wet room floors (ask us) and shower trays alike.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Where
Wooden (SA69)
Area hub
Pembrokeshire
Guarantee
One year on every repair
Quote
Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

How we price non-slip bath coating

A fixed quote means you know the cost before you book. We take into account:

  • The material
  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it

We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed price

Before you send pictures, a few simple things make all the difference:

  • The material, if you know it
  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates
  • A clear, close picture of the problem area

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

What happens on the day

You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. It typically takes a morning or an afternoon, and you’re welcome to carry on with your day while we work.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Tell us about parking, stairs or access
  • Make sure the area is dry
  • Point us to the nearest place to park

Ask for a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a fixed quote

Read more

About Wooden

Wooden is about 12 miles south-east of Haverfordwest, in Pembrokeshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 223 towns and villages across Pembrokeshire.

Postcode districts we cover here: SA69. Local streets include Valley Road, Vineyard Vale and Valley Close, all of which we cover. Close by, we cover The Valley (1 mile east), Pentlepoir (1 mile north), Hill (1 mile north-east), Kingsmoor (1 mile north-east) and Saundersfoot (1 mile east). Within a short drive, we also cover Haverfordwest (12 miles north-west), Milford Haven (13 miles west), Pembroke (8 miles west), Pembroke Dock (9 miles west), The Marsh (12 miles north-west) and Dinbych-y-Pysgod (3 miles south).

Near you in Wooden

We visit homes around Woodridge Inn Hotel and St Issell's Church, among other places. The nearest railway station is Saundersfoot station, roughly 0.6 miles north-east. Further afield, we also cover the area around Castle Ring (1.2 miles north) and Tudor Merchant's House Museum (3.3 miles south-east). Not far away are Pentlepoir Hill.

Map of Wooden © OpenStreetMap contributors

Signs you need non-slip bath coating in Wooden

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Customers usually contact us about:

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth

Questions to ask before you book

  • How your room will be protected
  • Whether a trained technician does the job
  • What preparation is included
  • When it can be used again

Choosing a repair company

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.

Your questions about non-slip bath coating in Wooden

What happens after I send pictures?

We check the damage, the material and your postcode, then reply with a quote.

Can you repair something that’s been repaired before?

Yes, we frequently do. It can add a little time, which we include in the quote.

Is there a guarantee?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

How much does non-slip bath coating cost in Wooden?

Because every job differs, we price from photos. You know the full cost before anything is booked.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

Do you work in Wooden?

We do. Repair technicians travel to Wooden from across the region, with no extra charge for travel.

Will I see the coating?

Very little: it shows as a matt area where you stand.

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

When we would advise against a repair

A repair is not always the answer, and we will tell you before we start. Repairs won’t solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

Materials we work on in Wooden

  • Acrylic baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why choose Surface Doctor in Wooden

  • Generally one visit, start to finish
  • We leave the room as we found it
  • Honest advice, even when it means no job
  • Everything repaired in place

See our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.