Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Wooden, Pembrokeshire
Full bath re-enamelling and resurfacing at your home in Wooden, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Stains that won’t shift
Bath re-enamelling at your home in Wooden
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. If you’re dealing with wear marks under the taps and a coating lifting around the plughole, we can usually put it right, whatever the material.
All our work comes with our one-year guarantee.
- Location
- Wooden (SA69)
- Region
- Pembrokeshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Wooden
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- How hard the colour is to match
- Any earlier repairs that need removing first
- How easy the damage is to reach
- How many items we do on one visit
Our prices are the same across the UK, with no extra for Wooden. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- The material, if you know it
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
Do you need bath re-enamelling in Wooden?
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Typical reasons for a call-out include:
- A roll-top that is seen better days
- Staining under the taps and around the waste
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Questions to ask before booking
- How your room will be protected
- What happens if they find more damage
- What aftercare is recommended
- How long it needs to cure
When a repair is not the answer
Before you book, it’s worth knowing the limits too:
- A cast iron or steel bath that is cracked right through
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Keeping it looking good
So the finish stays in good condition for years:
- Do not let dyes or oils sit on the finish
- Respect the curing time we give you
- Fix dripping taps quickly
- Never use suction bath mats
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Wooden and the surrounding area
Wooden is about 12 miles south-east of Haverfordwest, in Pembrokeshire. Our repair technicians come to clients in Wooden and nearby villages, so there is no workshop to go to. Wooden is one of 223 places in Pembrokeshire we cover.
Every address in SA69 is within our area, from the main roads to the quietest streets. That includes homes on Valley Road, Vineyard Vale and Valley Close and the roads around them. Nearby, we also work in The Valley (1 mile east), Pentlepoir (1 mile north), Hill (1 mile north-east), Kingsmoor (1 mile north-east) and Saundersfoot (1 mile east). Larger places within reach include Haverfordwest (12 miles north-west), Milford Haven (13 miles west), Pembroke (8 miles west), Pembroke Dock (9 miles west), The Marsh (12 miles north-west) and Dinbych-y-Pysgod (3 miles south).
Around Wooden
Our customers here include homes close to Woodridge Inn Hotel and St Issell's Church. The nearest railway station is Saundersfoot station, about 0.6 miles north-east. A little further out are Castle Ring (1.2 miles north) and Tudor Merchant's House Museum (3.3 miles south-east). Not far away are Pentlepoir Hill.
FAQs for Wooden
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your SA69 postcode.
What happens next?
We review the photos and send a fixed quote with dates.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
The process
Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. Allow a full day, and we will keep you posted as we go.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
How to get a price
Most clients in Wooden get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
What else we do in Wooden
About our accreditations · Every repair comes with a one-year guarantee.
