Cambridgeshire · England
Shower Tray Repair for Bourn homes
Shower tray chip, crack and scratch repairs and resurfacing in Bourn, carried out at your home and guaranteed for a year.
- Repairs from £95
- A cracked shower tray
- A tray that flexes
Landlord and trade work in Bourn
For anyone letting property in or around Bourn, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
About our shower tray repair in Bourn
We repair a lot of shower trays. Chips by the waste, cracks across the base and dull, stained surfaces can all be put right without removing the tray. Our repair technicians work on stone resin, acrylic and cast iron, and common reasons people get in touch are scratches from cleaning or grit and staining and dullness across the tray.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Bourn (CB23)
- Area hub
- Cambridgeshire
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
More services for Bourn
Do you need shower tray repair in Bourn?
Rigid trays don’t bend, they crack if the floor beneath them is not flat and fully supported. Timber floors that move can cause it too.
The most common problems we are called about are:
- Movement when you stand on it
- A dull, stained or worn surface
- Scratches from cleaning or grit
- Snagging damage in a new bathroom
Questions to ask before booking
- Who turns up on the day
- A fixed price, and whether VAT is included
- If travel is included in the price
- How long the guarantee is and what it covers
What affects the price in Bourn
Repairs from £95. We don’t charge extra for travel to Bourn. The price comes down to:
- Whether old repairs or coatings need taking off
- What the surface is made of
- What kind of damage it is
- Doing more than one item at once
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what helps:
- Details of any past repairs
- A clear, close picture of the problem area
- A wider photo showing the entire shower tray
- Where you are, by postcode
To get a price, send two or three photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
What your shower tray is made of matters
Enamelled steel
Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.
Acrylic
Acrylic trays are lighter and slightly flexible, so a firm base is essential. Cracks and scratches can be repaired.
How the visit works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours for a repair, longer for a full resurface, and the room is left clean and tidy.
- We check the tray is firmly supported and find the cause of any crack.
- We clean and prepare the damaged area or the whole tray.
- Chips and cracks are filled, reinforced and sanded level.
- We colour-match the repair, or spray a new finish across the entire tray.
- The tray is left to cure and can normally be used the day after.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
Get a quote
Send us a photo of the damage and one of the entire item, and tell us you’re in Bourn, and we will come back with a fixed quote.
Related advice
Keeping it looking good
So the finish stays in good condition for years:
- Avoid strong descalers and bleach
- Rinse away soap after showering
- Replace failing sealant promptly
- Use a mild, non-abrasive cleaner
Avoid abrasive pads and strong descalers. Warm water and a mild detergent is enough.
If the tray creaks or moves, get it checked, before it cracks.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- A tray broken in more than one place
- Damage below the tray that needs a builder
- A tray that flexes because it was never properly supported
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Enamelled steel
- Ceramic
- Stone resin
- Acrylic
- Cast iron
Questions from Bourn
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
Do you cover Bourn?
Yes, we do. Repair technicians travel to Bourn from across the region, and the price is the same as everywhere else.
How do I get a price for shower tray repair in Bourn?
Repairs from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
Do you reseal the tray as well?
Yes, if you’d like us to. It’s a good time to replace old sealant.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Repair or replace: which is better?
A new shower tray frequently means a new enclosure fitting, new tiling and new sealant. Repairing it avoids all of that and costs far less. Our shower tray repair starts from £95. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why Bourn customers choose us
- Colour mixed on the day to match
- No need to remove anything
- One price list for the whole UK
- CHAS and Constructionline accredited
Read our full price list.
Our work in Bourn
Bourn is about 8 miles west of Cambridge, in Cambridgeshire. Anywhere in CB23, we come to you. Bourn is one of 371 places in Cambridgeshire where we work. You can also see our page for London, about 48 miles away.
We work across CB23. You will find streets such as High Street, Short Street and Church Street, and we cover them all. We also cover the places around Bourn: Crow End (1 mile north-east), Longstowe (1 mile south-west), Caldecote (2 miles east), Kingston (2 miles south-east) and Toft (2 miles east). Larger places within reach include Cambridge (8 miles east), St Neots (9 miles west), Huntingdon (11 miles north-west), St Ives (10 miles north), Royston (10 miles south) and Godmanchester (10 miles north-west).
Near you in Bourn
Locally, our jobs take us to homes close to Kingston and Bourn Old Railway, Bourn CofE Primary Academy and Cambourne Village College, among other places. Further afield, we also cover the area around Orwell Toot Hill (4.4 miles south-east). Not far away are Cambourne Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
