Glasgow · Scotland

Shower tray repair & resurfacing in Cadder, Glasgow

Local shower tray repair for Cadder: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Chips caused during fitting
  • A tray that creaks or moves underfoot
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Cadder

What your shower tray is made of matters

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and the repair is polished to match the shine.

Shower tray repair in Cadder, done in place

A cracked or chipped shower tray doesn’t always need replacing. If it’s solid underneath, it can usually be repaired in place, which is far less work than a replacement. If you’re dealing with scratches from cleaning or grit and chips on the edges, we can typically put it right, whatever the material.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Where
Cadder (G20, G23, G22)
Area hub
Glasgow
Guarantee
One year on every repair
Quotes
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

How it works

We turn up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, or most of the day to resurface the whole tray, and the room is left clean and tidy.

  1. We check the tray for movement first.
  2. We clean the damage and open it up so the repair can bond.
  3. Cracks are reinforced and the damage filled.
  4. We shape the repair, match the colour and finish it.
  5. It’s left to cure, usually until the day after.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Point us to the nearest place to park
  • Keep children and pets away from the room on the day

Get a quote

For a price in Cadder, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Advice

Our work in Cadder

Cadder is about 1 mile north of North Kelvinside, in Glasgow. Clients in Cadder get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Cadder is one of 183 towns and villages in Glasgow where we work.

All of G20, G23 and G22 is covered. From Cadder Road, Tresta Road and Hillend Road or anywhere nearby, a technician can come to you. Main roads around Cadder include the A879, which makes travel easy. Nearby, we also work in Gilshochill (1 mile south-west), Lambhill (1 mile south-east), High Ruchill (1 mile south), Maryhill (1 mile west) and Ruchill (1 mile south). Further out, we also cover Glasgow (3 miles south), Calton (4 miles south-east), Langside (5 miles south), Yoker (4 miles west), Mount Florida (5 miles south) and Hillpark (6 miles south).

Local landmarks in Cadder

Typical jobs here are in homes near Glasgow, Glasgow University Library and John Paul Academy. There’s a railway station in Cadder itself: Gilshochill station. Further afield, we also cover the area around Chinatown (2.1 miles south) and Ruchill Hospital (0.9 miles south-east). For a walk, there is Bardowie Loch and Castle Hill.

Map of Cadder © OpenStreetMap contributors

Looking after it afterwards

Most damage we see is avoidable. A few tips:

  • Report any creaking or movement early
  • Give the tray a quick rinse after use
  • Replace failing sealant promptly
  • Do not use strong acids or bleach

Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.

If the tray creaks or moves, get it checked, before it cracks.

FAQs for Cadder

Can you replace the silicone at the same time?

Yes. We can repair and reseal on the same visit.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you resurface a whole tray?

Yes, it’s a common job. Resurfacing gives a worn tray an even, clean finish.

What happens once I’ve sent pictures?

You get a fixed price and available dates. If we need another angle, we will ask.

Is it worth repairing rather than replacing?

Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Can you repair something that is been repaired before?

In most cases. The old repair comes out first, so let us know about it.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Will there be a smell?

It depends on the job, but frequently a little. Open windows and an extractor fan help.

Honest limits

A repair isn’t always the answer, and we’d rather say so up front. Repairs won’t solve:

  • Movement caused by a poor base, until the support is fixed
  • Leaks from the waste or pipework (a plumber’s job)
  • Rotten or damaged flooring underneath

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Cast iron
  • Enamelled steel
  • Ceramic
  • Stone resin
  • Acrylic

When to call us in Cadder

Cracks often start at the waste, where the tray is cut and the fitting is tightened.

The things clients usually mention when they call include:

  • A crack across the base
  • Edge chips from dropped bottles
  • Damage around the waste
  • Scuffs and light scratches

What your quote should include

  • How the room is protected while they work
  • Who will actually do the work
  • What preparation is included
  • What the guarantee covers, and for how long

10 questions to ask before you book

Repair or replace: which is better?

If the tray is solid and the crack hasn’t let water spread, repair is normally best. If the floor is damaged or the tray is badly cracked, replacement may make more sense. Our shower tray repair starts from £95. Our prices are the same across the UK, with no extra for Cadder. What changes the price is the job itself: how much damage, what it’s made of and how many items.

What you get with us

  • A fixed quote before you book
  • CHAS, Constructionline and SafeContractor accredited
  • Colour-matched on site
  • Repair technicians who travel to you, UK-wide

See our full price list.

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

What shower tray repair costs

Repairs from £95. There’s no charge for travel to Cadder. The price depends on:

  • The material and finish
  • How many items we do on one visit
  • Whether it’s a chip, crack, burn or wear
  • How many areas need work

Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Getting a price from photos

Good photos mean an accurate price. Here’s what we find most useful:

  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size
  • A wider photo showing the whole shower tray
  • The postcode, so we can plan the visit

The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say straight away whether it can be repaired.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.