Argyll and Bute · Scotland
Shower tray repair & resurfacing in Clynder, Argyll and Bute
Damaged shower tray in Clynder? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A tray that creaks or moves underfoot
- A dull, stained or worn surface
Landlord and trade work in Clynder
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
How we handle shower tray repair in Clynder
A worn or stained tray can be resurfaced, for a clean, uniform finish. Whether it’s a tray that flexes and snagging damage in a new bathroom, we can help.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Clynder (G84)
- Area hub
- Argyll and Bute
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair is not the answer
It helps to know what we can’t do too:
- Leaking waste fittings
- Damage below the tray that needs a builder
- A tray broken in more than one place
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Acrylic
- Cast iron
- Enamelled steel
- Ceramic
- Stone resin
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Also near Clynder
Also in Clynder
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Stick to gentle cleaners
- Reseal when the silicone splits or turns black
- Give the tray a quick rinse after use
- Keep harsh chemicals off the tray
Keep scourers and harsh chemicals off the tray. Warm water and a mild detergent is enough.
Failed sealant around a tray should be replaced quickly. Water gets behind and under the tray and can cause damage underneath.
Do you need shower tray repair in Clynder?
A tired-looking tray is often the result of years of cleaning: abrasive pads, strong chemicals and limescale wear the finish away.
Send us a picture if you notice any of these:
- A cracked shower tray
- A tray that flexes
- Chipped corners or rims
- Scratches in the surface
Comparing quotes
- What preparation is included
- Whether the price covers travel
- How to care for the finish
- A fixed price, and whether VAT is included
Covering Clynder
Clynder is about 4 miles west of Helensburgh, in Argyll and Bute. Anywhere in G84, we carry out the work at your property. Our repair technicians cover 118 places across Argyll and Bute. Our jobs stretch from Clynder to Glasgow (24 miles away).
Here we cover the G84 postcode area. From Pier Road, Straid Bheag and Straid-a-Cnoc or anywhere nearby, a technician can come to you. Other places close to Clynder include Rahane (2 miles north-west), Cove (2 miles south-west), Ardpeaton (2 miles west), Coulport (2 miles north-west) and Mambeg (3 miles north). Within a short drive, we also cover Helensburgh (4 miles east), Dunoon (6 miles south-west), Port Bannatyne (15 miles south-west), Sandbank (6 miles south-west) and Innellan (11 miles south-west).
What’s near Clynder
Our customers here include homes close to Rosneath. The closest station to Clynder is Helensburgh Upper station, about 3.3 miles east of the centre. Other landmarks nearby include Cove Castle (2.3 miles south-west) and Victoria Infirmary (4.1 miles east). Open spaces near Clynder include Lyle Hill.
What shower tray repair costs
Repairs from £95. A fixed quote means you know the cost before you book. We take into account:
- How easy the damage is to reach
- What the surface is made of
- The colour and finish to match
- How many areas need work
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- The material, if you know it
- Natural light rather than flash
- Where you are, by postcode
- A clear, close picture of the problem area
Upload photos of the damage and a wider shot of the whole item, with your G84 postcode, and we will come back with a fixed quote.
How the visit works
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. Allow a few hours, or most of the day to resurface the whole tray, and we’ll tell you if anything changes.
- We check the tray for movement first.
- We clean the damage and open it up so the repair can bond.
- Cracks are reinforced and the damage filled.
- We shape the repair, match the colour and finish it.
- It’s left to cure, typically until the next day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
Related advice
Questions from Clynder
What areas do you cover?
We cover the entire UK, including Clynder and the rest of Argyll and Bute. Just include your postcode and we will offer you dates.
Do you redo the sealant?
Yes, if you’d like us to. It’s a good time to replace old sealant.
Are there extra charges for Clynder?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you resurface a whole tray?
Yes, it’s a common job. A full resurface makes a tired tray look fresh.
Do you work in Clynder?
We do. We send a technician to Clynder for every job, with no extra charge for travel.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Repairing versus replacing in Clynder
When the tray is firm and dry underneath, repair is the obvious choice. If the floor is damaged or the tray is badly cracked, replacement may make more sense. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why us?
- Everything repaired in place
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- Repair technicians who travel to you, UK-wide
Take a look at our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
