Wiltshire · England
Shower tray repair & resurfacing in Coombe, Wiltshire
Shower tray chip, crack and scratch repairs and resurfacing for householders, landlords and businesses in Coombe. Free, fixed quotes from your pictures.
- Repairs from £95
- Scratches from cleaning or grit
- A crack across the base
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Shower tray repair in Coombe without replacing anything
You don’t always need a new tray. If it’s solid underneath, it can normally be repaired in place, saving you the cost and mess of a new one. Typical jobs include damage from a refit or building work and scratches in the surface, in enamelled steel, ceramic and stone resin.
You get a one-year guarantee, the same in Coombe as everywhere else we work.
- Where
- Coombe (SN9)
- Area hub
- Wiltshire
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Coombe
When the tray is firm and dry underneath, repair is the obvious choice. If the floor is damaged or the tray is badly cracked, replacement may make more sense. Our shower tray repair starts from £95. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.
What you get with us
- Dust sheets down, tidy finish
- Every repair guaranteed for a year
- One visit for most repairs
- We’ll tell you if it’s not worth repairing
Take a look at our prices page.
What we do, step by step
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a few hours for a repair, longer for a full resurface, and you can get on with other things while we are there.
- First, we check whether the tray moves.
- The damaged area is cleaned and opened up.
- We reinforce any crack and fill the damage.
- The repair is shaped, colour-matched and finished.
- It’s left to cure, usually until the day after.
Before we arrive
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
Ask for a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Related advice
Common questions in Coombe
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What does shower tray repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Wiltshire.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you’ll get one combined price.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Landlord and trade work in Coombe
If you manage property in Coombe, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Honest limits
To be straight with you, some problems need a different fix:
- A tray that flexes because it was never properly supported
- Leaks from the waste or pipework (a plumber’s job)
- Damage below the tray that needs a builder
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Ceramic
- Acrylic
- Enamelled steel
- Stone resin
- Cast iron
Where we work around Coombe
Coombe is about 6 miles north of Amesbury, in Wiltshire. Jobs in Coombe are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We cover all 425 towns and villages across Wiltshire, from the larger towns to small villages. Our jobs stretch from Coombe to London (75 miles away).
Postcode districts we cover here: SN9. We also travel to Fittleton (1 mile south-west), Haxton (1 mile south), Littlecott (1 mile north-west), Netheravon (1 mile south-west) and Figheldean (2 miles south). Larger places within reach include Salisbury (12 miles south), Devizes (11 miles north-west), Amesbury (6 miles south), Marlborough (12 miles north), Bugmore (13 miles south) and Milford (13 miles south).
Landmarks near Coombe
We visit homes around Church of All Saints, among other places.
Places near Coombe
Also in Coombe
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Coombe. The price reflects:
- The material and finish
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- Doing more than one item at once
We charge the same wherever you are, so there’s no premium for Coombe. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
You can generally get a fixed quote without us visiting. To help us price it:
- Good light, ideally daylight, without flash glare
- One picture of the whole shower tray
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Signs you need shower tray repair in Coombe
Stone resin trays are rigid, so they crack rather than bend if the floor beneath them is not flat and fully supported. Movement in a timber floor has the same effect.
The things clients typically mention when they call are:
- A crack across the base
- Staining and dullness across the tray
- Movement when you stand on it
- Scratches in the surface
What your quote should include
- What aftercare is recommended
- How the room is protected while they work
- Who turns up on the day
- A fixed quote, and whether VAT is included
Keeping it looking good
Looking after the surface is easy:
- Clean with washing-up liquid and a soft cloth
- Don’t stand heavy bottles on the tray
- Keep harsh chemicals off the tray
- Check the seal every few months
Rinse the tray after use, clean with mild cleaners, and keep an eye on the sealant so water can’t get underneath.
Don’t keep using a cracked tray. Water can get through to the floor and walls, and the damage below is not visible.
About our accreditations · Every repair comes with a one-year guarantee.
