Wiltshire · England
Bath re-enamelling & resurfacing in Coombe, Wiltshire
Full bath re-enamelling and resurfacing in Coombe, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a full day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the next day.
Before we arrive
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Make sure the room can be ventilated
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Read more
Bath re-enamelling in Coombe without replacing anything
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for wear marks under the taps and a bath that stays dull however much you clean it, across acrylic baths, basins & shower trays and pressed steel baths.
All our work is covered by our one-year guarantee, wherever you are in Wiltshire.
- Area
- Coombe (SN9)
- Region
- Wiltshire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
When a repair is not the answer
To be straight with you, there are a few things a repair will not fix:
- A cast iron or steel bath that’s cracked right through
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we will say what we think before booking.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Places near Coombe
More services for Coombe
About Coombe
Coombe is about 6 miles north of Amesbury, in Wiltshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We work in 425 places across Wiltshire. Our nearest city page is London, about 75 miles away.
We cover every part of the SN9 postcode area and the streets around it. Nearby, we also work in Fittleton (1 mile south-west), Haxton (1 mile south), Littlecott (1 mile north-west), Netheravon (1 mile south-west) and Figheldean (2 miles south). Larger places within reach include Salisbury (12 miles south), Devizes (11 miles north-west), Amesbury (6 miles south), Marlborough (12 miles north), Bugmore (13 miles south) and Milford (13 miles south).
Near you in Coombe
Locally, our jobs take us to homes close to Church of All Saints and the streets around them.
Prices and what affects them
Prices start from £350. Prices are worked out job by job. The main factors are:
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- The material and finish
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
Photographing the damage takes a minute. Please include:
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Repairing versus replacing in Coombe
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing generally wins. Prices start from £350. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why book with us
- Most jobs done in one visit
- Same prices wherever you are
- We’ll tell you if it’s not worth repairing
- A year’s guarantee on all work
Read our prices page or bath cost comparison.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Signs you need bath re-enamelling in Coombe
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Most people get in touch when they notice something like this:
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
Questions to ask before you book
- How to look after the finish
- Who turns up on the day
- Whether they match the colour on site
- How the room is protected while they work
Landlords, agents and businesses in Coombe
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Coombe: your questions answered
Do you cover Coombe?
Yes. We cover the whole UK and come to Coombe and the rest of Wiltshire. Send photos and we will quote, or call 0345 017 0787.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Do you cover the entire of Wiltshire?
We work UK-wide, so Coombe is covered. Prices don’t change with location.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
About our accreditations · Every repair comes with a one-year guarantee.
