Cumbria · England
Shower tray repair & resurfacing in Ulverston, Cumbria
Local shower tray repair for Ulverston: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A dull, stained or worn surface
- Cracks running from the waste
Shower tray repair in Ulverston without replacing anything
We repair a lot of shower trays. Chipped edges, cracks and worn finishes can all be put right without removing the tray. Typical jobs include a tray that flexes and chips caused during fitting, across ceramic, stone resin and cast iron.
Whatever the size of the job, you get the same one-year guarantee in Ulverston and across Cumbria.
- Area
- Ulverston (LA12)
- Region
- Cumbria
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What your shower tray is made of matters
Ceramic
Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and the repair is polished to match the shine.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What affects the price in Ulverston
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- The colour and finish to match
- The type of damage
- What the surface is made of
- Doing more than one item at once
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- What it’s made of, if you know
- Details of any past repairs
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll say right away if a repair is the right fix.
Towns and villages near Ulverston
Other services in Ulverston
Landlord and trade work in Ulverston
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
If you manage property in Ulverston, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
Why repair rather than replace?
When the tray is firm and dry underneath, repair is the obvious choice. If the floor is damaged or the tray is badly cracked, replacement may make more sense. Prices start from £95. Our prices are the same across the UK, so there’s no premium for Ulverston. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Straight answers about what a repair can do
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
See our prices page.
When to call us in Ulverston
Cracks frequently start at the waste, where the tray is cut and the fitting is tightened.
Clients typically contact us about:
- Cracks running from the waste
- A tray that looks tired however much you clean it
- Chips caused during fitting
- Scratches in the surface
What to look for in a quote
- Whether there are any call-out or travel charges
- What prep work is covered
- How long it needs to cure
- What aftercare is recommended
Ulverston questions
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How do I get a price for shower tray repair in Ulverston?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do you redo the sealant?
We can. It’s a good time to replace old sealant.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
How long does it take to cure?
We’ll give you the curing time on the day.
Our work in Ulverston
Ulverston is about 8 miles north-east of Barrow-in-Furness, in Cumbria. Whether you’re in the middle of Ulverston or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover 438 places across Cumbria. Our nearest city page is Liverpool, about 55 miles away.
We work across LA12. From New Market Street, Market Street and Oxford Street or a nearby road, we can come to you. With the A590 and A5087 close by, Ulverston is easy for our repair technicians to reach. If you are just outside Ulverston, we cover Dragley Beck (1 mile south-east), Swarthmoor (1 mile south-west), Pennington (2 miles west), Broughton Beck (2 miles north) and Bardsea (2 miles south). We also work in nearby towns such as Barrow-in-Furness (8 miles south-west), Hindpool (8 miles south-west), Salthouse (8 miles south-west), Dalton-in-Furness (4 miles south-west), Risedale (7 miles south-west) and Vickerstown (9 miles south-west). Ulverston is one of the larger places we cover in Cumbria.
Near you in Ulverston
Locally, our jobs take us to homes close to Ulverston Victoria High School, Kings Head Public House and Holy Trinity Church. There is a railway station in Ulverston itself: Ulverston station. Other landmarks nearby include Laurel And Hardy Museum (under half a mile north-west) and Dalton Castle (4.6 miles south-west). Not far away are Urswick Tarn and Birkrigg Common.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- A tray that moves underfoot
- Trays cracked in several places
- Plumbing leaks under the tray
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Ulverston
- Stone resin
- Enamelled steel
- Acrylic
- Ceramic
- Cast iron
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
The process
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours for a repair, longer for a full resurface, and the room is left clean and tidy.
- First, we check whether the tray moves.
- The damaged area is cleaned and opened up.
- We reinforce any crack and fill the damage.
- We shape the repair, match the colour and finish it.
- It’s left to cure, usually until the following day.
Preparing for the visit
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
