Hampshire · England
Shower tray repair & resurfacing in Deadwater, Hampshire
Shower tray chip, crack and scratch repairs and resurfacing in Deadwater, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips on the edges
- Damage around the waste
When to call us in Deadwater
Rigid trays do not bend, they crack when they sit on an uneven or poorly supported floor. Timber floors that move can cause it too.
You may need us if you’ve spotted:
- A tray that creaks or moves underfoot
- A damaged area around the waste
- Edge chips from dropped bottles
- Staining and dullness across the tray
What to look for in a quote
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- Who turns up on the day
- If travel is included in the price
Shower tray repair in Deadwater without replacing anything
We repair cracks, chips and scratches in stone resin, acrylic and ceramic trays, or resurface the whole tray if it’s worn. The tray stays in place, so the screen and tiling stay as they are. If you’re dealing with cracks running from the waste and chips caused during fitting, we can generally put it right, on enamelled steel, stone resin and cast iron alike.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
- Where
- Deadwater (GU35)
- Area hub
- Hampshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Plumbing leaks under the tray
- Water damage to the floor beneath the tray
- A tray broken in more than one place
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Ceramic
- Enamelled steel
- Cast iron
- Stone resin
- Acrylic
The process
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, or most of a day for a full resurface, and we leave the room as we found it.
- We check the tray is firmly supported and find the cause of any crack.
- The damaged area, or the whole tray, is cleaned and prepared.
- Chips and cracks are filled, reinforced and sanded level.
- We match the colour, or refinish the full tray.
- We leave it to cure; the shower is usually usable the following day.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire shower tray, we can price the job the same day in most cases.
Advice
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Keep harsh chemicals off the tray
- Give the tray a quick rinse after use
- Ventilate the room after showers
- Keep heavy bottles on a shelf
Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.
Do not keep using a cracked tray. Water may be getting under the tray, where it causes damage you cannot see.
Should you replace it?
When the tray is firm and dry underneath, repair is the obvious choice. If water has damaged the floor, or the tray is cracked in several places, a new tray may be better. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there is no premium for Deadwater. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- We leave the room as we found it
- Colour-matched on site
- One-year guarantee on every repair
- Work done at your home or business
Take a look at our pricing.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Also near Deadwater
More services for Deadwater
Prices and what affects them
Repairs from £95. We do not charge extra for travel to Deadwater. The price comes down to:
- How easy the damage is to reach
- What the surface is made of
- The type of damage
- Whether old repairs or coatings need taking off
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- What it’s made of, if you know
- Any earlier repairs or coatings
Email us a photo of the damage and a wider shot of the whole item, and tell us you’re in Deadwater, and we will reply with a fixed price.
Deadwater and nearby
Deadwater is about 1 mile east of Bordon, in Hampshire. Jobs in Deadwater are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We cover all 683 towns and villages in Hampshire. We work right across the region, from Deadwater to London (about 42 miles away).
Here we cover the GU35 postcode area. Whether you live on Alma Road, Varna Road and Rowan Road or anywhere nearby, we can come to you. Neighbouring places we cover include Lindford (1 mile north-east), Bordon (1 mile west), Hollywater (1 mile south), Standford (1 mile south-east) and Pinewood Village (1 mile north-west). We also work in nearby towns such as Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (6 miles north-west) and Petersfield (8 miles south-west).
Local landmarks in Deadwater
Locally, our jobs take us to homes close to Weyford Nursery and Primary School, Mill Chase Academy and St Mark's Sacred Church, among other places. The closest station to Deadwater is Liphook station, roughly 3.6 miles south-east. Other landmarks nearby include Chase Community Hospital (0.7 miles south-west). Green spaces nearby include Deadwater Valley and Selborne Hill.
Your questions about shower tray repair in Deadwater
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Do you cover Deadwater?
We do. We send a technician to Deadwater for every job, with no extra charge for travel.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Landlord and trade work in Deadwater
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Deadwater, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
About our accreditations · Every repair comes with a one-year guarantee.
