Oxfordshire · England
Shower tray repair & resurfacing in Finstock, Oxfordshire
Our repair technicians come to Finstock for shower tray chip, crack and scratch repairs and resurfacing. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Chips caused during fitting
- A tray that looks tired however much you clean it
How we price shower tray repair
Prices start from £95. Every quote is fixed and free. What we look at:
- How many areas need work
- Unusual colours or finishes
- Doing more than one item at once
- The material
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
We price nearly every job from photos. This is what we need:
- Daylight if possible, and no flash reflection
- The material, if you know it
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Shower tray repair in Finstock, done in place
We check the tray before repairing it: if it flexes underfoot, the cause needs sorting before any repair, otherwise any crack returns. We will tell you if that’s the case. Whether it’s edge chips from dropped bottles and chips caused during fitting, we can help, on cast iron, enamelled steel and stone resin alike.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Finstock (OX7)
- Region
- Oxfordshire
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Materials and what they mean for the repair
Acrylic
Acrylic-capped trays are lighter, so good support matters. We repair cracks and scratches.
Stone resin
Stone resin is a dense, rigid material with a smooth gel coat. They crack if the base isn’t fully supported, and chips are filled and matched to the surface.
Repairing versus replacing in Finstock
The tray itself may not cost much, but the work around it does: taking out the enclosure, tiling and resealing. Repairing it takes one visit. Prices start from £95. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why Finstock clients choose us
- One-year guarantee on every repair
- Same prices wherever you are
- Nothing taken out or refitted
- We leave the room as we found it
Read our prices page.
Your questions about shower tray repair in Finstock
How do I get a price for shower tray repair in Finstock?
Repairs from £95. Every job gets a fixed quote from your pictures. Send a close-up and a photo of the entire item and your postcode.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can I get a quote without a visit?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Do you redo the sealant?
Yes. Add it to your quote and we will do both on one visit.
Is a repair better than a new one?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you need shower tray repair in Finstock?
The waste is a common starting point for cracks, because that’s where the tray is weakest and the fitting puts pressure on it.
Most people get in touch after spotting one of these:
- Damage from a refit or building work
- Staining and dullness across the tray
- A tray that creaks or moves underfoot
- A crack across the base
Questions to ask before you book
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- What aftercare is recommended
- What happens if the damage is worse than the pictures show
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours, or most of the day to resurface the whole tray. If we find something your photos didn’t show, we will explain it before carrying on.
- We protect the floor and the enclosure.
- Old sealant is removed if it’s in the way.
- We clean and key the tray, then repair the damage.
- We refinish the surface to match the tray.
- We tidy up and tell you when you can shower.
How to prepare
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the shower tray, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
What else we do in Finstock
What we cannot put right
Honesty matters more than a booking, so here’s what a repair will not do:
- Multiple cracks across the tray
- Movement caused by a poor base, until the support is fixed
- Water damage to the floor beneath the tray
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Finstock
- Cast iron
- Acrylic
- Enamelled steel
- Stone resin
- Ceramic
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Where we work around Finstock
Finstock is about 4 miles north of Witney, in Oxfordshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Finstock is one of 443 towns and villages in Oxfordshire where we work. We work right across the region, from Finstock to Birmingham (about 47 miles away).
Every address in OX7 is covered, from the main roads to the quietest streets. Whether you live on High Street, Hill Crescent and Well Hill or anywhere nearby, we can come to you. Close by, we cover Ramsden (1 mile south-west), Fawler (1 mile north-east), Delly End (2 miles south), Charlbury (2 miles north) and Stonesfield (2 miles east). Larger places within reach include Oxford (12 miles south-east), Bicester (14 miles east), Abingdon-on-Thames (14 miles south-east), Witney (4 miles south), Carterton (7 miles south-west) and Faringdon (14 miles south).
Near you in Finstock
Typical jobs here are in homes near Finstock Church of England Primary School, Church of the Holy Trinity and The Plough Inn, among other places. The nearest railway station is Finstock station, about 0.7 miles north-east. For a walk, there’s Blenheim Farm.
About our accreditations · Every repair comes with a one-year guarantee.
