Hampshire · England

Shower tray repair & resurfacing in Firgo, Hampshire

Our repair technicians come to Firgo for shower tray chip, crack and scratch repairs and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • Chips caused during fitting
  • Edge chips from dropped bottles
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Firgo

When a repair is not the answer

Some problems need a builder, plumber or fitter rather than us:

  • Multiple cracks across the tray
  • Leaking waste fittings
  • Movement caused by a poor base, until the support is fixed

Send us photos and we will tell you honestly before you book.

Materials we work on in Firgo

  • Cast iron
  • Acrylic
  • Stone resin
  • Enamelled steel
  • Ceramic

Shower tray repair in Firgo, done in place

You don’t always need a new tray. If it’s solid underneath, it can normally be repaired in place, saving you the cost and mess of a new one. Our technicians work on ceramic, stone resin and cast iron, and common reasons people contact us are staining and dullness across the tray and chips caused during fitting.

You get a one-year guarantee, the same in Firgo as everywhere else we work.

Area
Firgo (RG28)
Area hub
Hampshire
Warranty
One year on every repair
Quotes
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Repair or replace: which is better?

Replacing a tray typically means refitting the screen, retiling and resealing. A repair leaves all of that untouched and costs far less. Our shower tray repair starts from £95. Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why choose Surface Doctor in Firgo

  • Rooms protected and left tidy
  • CHAS and Constructionline accredited
  • A year’s guarantee on all work
  • Nothing taken out or refitted

See our full price list.

Common questions in Firgo

How long does it take to cure?

Normally by the following day. We’ll tell you the exact time when we finish.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Will there be a smell?

Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.

Do you do work for letting agents?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Firgo.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.

Is a repair better than a new one?

Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

When can you do it?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

What your shower tray is made of matters

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

Ceramic

Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and we match the gloss when we repair them.

Keeping it looking good

So the finish stays in good condition for years:

  • Keep the bathroom well ventilated
  • Clean with washing-up liquid and a soft cloth
  • Don’t stand heavy bottles on the tray
  • Get a moving tray checked

Rinse the tray after use, use mild, non-abrasive cleaners, and keep the sealant in good condition so water can’t get underneath.

Every shower forces a little water into a crack, which can damage the floor over time. An early repair is far cheaper than floor repairs.

What happens on the day

We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the job itself takes a few hours, or most of a day for a full resurface. At the end we talk you through how soon it can be used and how to look after it.

  1. We check the tray for movement first.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. The repair is shaped, colour-matched and finished.
  5. It’s left to cure, usually until the next day.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Mention any parking restrictions or tricky access
  • Make sure the room can be ventilated

Ask for a price

To get a price, send a couple of pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Send photos for a quote

Advice

When to call us in Firgo

Cracks frequently start at the waste, because that’s where the tray is weakest and the fitting puts pressure on it.

The things customers generally mention when they call are:

  • A tray that creaks or moves underfoot
  • Chips caused during fitting
  • Scratches in the surface
  • Cracks running from the waste

Comparing quotes

  • What prep work is covered
  • How long the guarantee is and what it covers
  • Whether the price is fixed and includes VAT
  • Whether a trained technician does the job

Choosing a repair company

What shower tray repair costs

Repairs from £95. There is no charge for travel to Firgo. The price comes down to:

  • Whether we combine several jobs
  • Where the damage is and how we get to it
  • Whether old repairs or coatings need taking off
  • How much damage there is

There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from pictures

We price nearly every job from photos. This is what to send:

  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale
  • Any details about the material
  • One picture of the entire shower tray

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Firgo and nearby

Firgo is about 6 miles east of Andover, in Hampshire. Our repair technicians come to homes and businesses in Firgo and the surrounding area, so nothing has to leave your home. Our repair technicians cover all 683 towns and villages in Hampshire. We work right across the region, from Firgo to London (58 miles away).

Postcode districts we cover here: RG28. We also travel to Hurstbourne Priors (2 miles north-west), Whitchurch (2 miles north), Wells-in-the-Field (2 miles north-east), Freefolk (3 miles north-east) and Cole Henley (4 miles north). We also work in nearby towns such as Basingstoke (11 miles north-east), Winchester (10 miles south), Andover (6 miles west), Chandler's Ford (15 miles south), Tadley (13 miles north-east) and Hyde (9 miles south).

Near you in Firgo

Around Firgo, we work in homes near Church of St Mary and Testbourne Community School. For rail, the closest station is Whitchurch (Hampshire) station, roughly 2.4 miles north of the centre.

Map of Firgo © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.